National Technical University of Athens (NTUA)
Ανάπτυξη και εξέλιξη τεχνικών μέτρησης και επεξεργασίας λειτουργικών μεγεθών που αφορούν στην πίεση καύσης και στον άξονα μετάδοσης της ισχύος με σκοπό τη διάγνωση
Abstract
dc:descriptionThis Doctoral Thesis pertains in the broader field of Diesel engine monitoring and diagnosis. The challenge of applying diagnostic methods on Diesel engines, is the determination of their operating condition and, where possible, unambiguous fault diagnosis. It was applied, extended and evaluated an existing diagnostic method, developed under the supervision of Professor Dr . D. Hountala which is based on the combined use of simulation and non - invasive measurement. It is evident that the measurement, at the first place, and its proper treatment are crucial for the reliability of the diagnostic results. However, the measurement in field applications, particularly for large scale engines, presents considerable difficulties and limitations. A similar difficulty presents the treatment and management of received measurements. In these two areas is focused mainly this thesis .Based on the above, a point of engagement of this thesis is the development of new and improvement of existing measurement techniques and processing methodologies for implementation in large Diesel engines, used in marine and power generation. Particular emphasis is placed on evaluating the diagnostic technique by conducting measurements in a controlled environment and on board (at sea). This was made possible for the first time in the context of this thesis because of technical difficulties arising from the size of engine and difficulties executing tests.New electronic devices were designed and built for recording the cylinder pressure diagram, the instantaneous (in-cycle) rotational speed and the instantaneous torque. For the last two applications were used microcontrollers executing assembly codes. By combining new and available measurement instrumentation, it was made possible to study complex effects, such as the effect of the variation of instantaneous speed during constant time step measurements and the effect of the variation of the load during the measurement. It was shown that these effects influence greatly the results of the diagnosis. New detection and correction methods were proposed. Data acquisition codes were developed in LabView, while data processing codes were developed in Matlab and Fortran. New codes are oriented on field application, providing a solution to known or newly detected problems. For the purposes of the thesis, plethora of experimental investigations were conducted at the ICE Laboratory, at plants of PPC, on marine engines onboard in cooperation with shipping companies and shipyards, DAEWOO Korea and SWS China .
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2014
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Antonopoulos, Antonios
- Αντωνόπουλος, Αντώνιος
Subjects
dc:subject × 18- Εμβολοφόροι κινητήρες
- Διάγνωση λειτουργικής κατάστασης και βλαβών
- Ναυτικοί κινητήρες; κινητήρες ηλεκτροπαραγωγής
- Δυναμοδεικτικό διάγραμμα
- Στιγμιαία ροπή
- Στιγμιαία ταχύτητα περιστροφής
- Διακύμανση φορτίου
- Reciprocating Engines
- Condition Monitoring and Fault Diagnosis
- Marine diesel engines
- Power Generation Engines
- Cylinder Pressure; Instantaneous Torque
- Instantaneous Speed
- Load Variation
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
dc:rights- Statement dc:rights
-
- BY_NC_ND
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/38091