Back to search

University of Patras

Ανάπτυξη καταλυτικών συστημάτων για την αναμόρφωση προϊόντων βιομάζας προς υδρογόνο ή / και αέριο σύνθεσης

Abstract

dc:description

In the present thesis, glycerol steam reforming has been investigated over various heterogeneous catalysts towards hydrogen or synthesis gas production. Glycerol steam reforming follows a very complicated reaction network including several parallel and consecutive steps including dehydrogenation, dehydration, polymerization and. This thesis aims at finding catalytic materials that can enhance the C-C bond cleavage reactions, preferably at lower temperatures while being carbon resistant. Taking into account these demands, catalysts based on commercial g-Alumina have been prepared and studied. This support is known for its physicochemical and mechanical properties especially when used in reforming processes. The active phase used was based on metals such as Ni, Ru and Co. After thorough testing Ru/Al2O3 catalyst exhibited high carbon resistance while Ni/Al2O3 catalyst showed higher stability over time. These catalysts were further investigated and modified using different oxides which resulted in modifying their surface acidity and physicochemical properties. The best catalytic performance was exhibited by Ni/La2O3-Al2O3 catalyst which had high activity and carbon resistance at all reaction conditions used. The optimum catalysts were then used to study the effect of operating parameters such as temperature, W/F and feed composition. These experiments led to the conclusion that the deactivation of the samples depends strongly on the carbon deposition rate as well as blockage of the catalytic active sites by undesirable intermediates. Next bimetallic catalysts Ni-M/Al2O3 (M: Co, Cu, Fe, Ag) were prepared in order to focus on eliminating carbon deposition. Carbon species were studied in quality and quantity using TEM, XRD and TPO either with CO2, O2 or H2O. Ni-Fe/Al2O3 was found to be very promising since it reduced carbon deposition in half while exhibiting high activity. It did not prove very stable though maybe due to the fact that iron tends to oxidize very easily. The final part of this work was a primary study of glycerol’s reactions pathway during its reforming and acetol was selected as a probe molecule since it was previously reported to be the most difficult to reform. Selected catalysts were used in reforming tests as well as during TPD/TPSR dynamic experiments. Major differences arise between different supports, La2O3-Al2O3 being the more active one with high hydrogen yields at 600 °C. When metal catalysts are used yields and selectivities towards CO2, CO, H2 and acetaldehyde are almost the same proving that surface acidity is not an important factor of this part of the reaction network.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kousi, Kalliopi
  • Κούση, Καλλιόπη

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/38129

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kousi, Kalliopi; Κούση, Καλλιόπη. Ανάπτυξη καταλυτικών συστημάτων για την αναμόρφωση προϊόντων βιομάζας προς υδρογόνο ή / και αέριο σύνθεσης. University of Patras, 2016. http://hdl.handle.net/10442/hedi/38129