Back to search

Aristotle University Of Thessaloniki (AUTH)

Έλεγχος εξασφάλισης κύλισης σε σφαιρικά ρομποτικά ακροδάκτυλα

Abstract

dc:description

Similarly to human hands, rolling contact motion of a robotic fingertip is irrevocably connected with the stable grasping and dexterous manipulation of an object by a robot hand. In contrast to a sliding contact, rolling robotic fingertips allow the fine and accurate adjustment of the contact positions, thus facilitating the dynamic achievement of grasp stability and object's desired pose. Although fingertips' rolling motion has been early recognized by researchers as an important contact property in order to enable robot hand dexterity, most of the existing controllers for dexterous grasping and manipulation consider rolling as a constraint rather than a control objective. Specifically, they base their design on an ideal system model expressed by differential algebraic equations, incorporating rolling constraints and thus assuming the availability of a potentially infinite friction. Hence, fingertips' rolling motion is considered to be a priori guaranteed and achieved. However in practice, the existing friction may not be sufficient to sustain the tangential forces induced by the controller. Consequently under normal friction conditions, most of the above controllers are likely to result in a fingertip's motion upon the contact surface that consists of both rolling and sliding or even only of sliding. In this work, guaranteeing the fingertip's rolling motion is not a priori assumed, but considered as an additional control objective. The proposed control laws presented in this thesis guarantee the rolling motion of a robotic finger's spherical tip upon any contact surface with unknown or even unfavorable friction conditions, controlling at the same time the tip's position upon the surface and the magnitude of the normal force exerted by the finger. In particular, this work presents control schemes that either utilize the knowledge of the robot finger's model (model based control) or that do not require such knowledge (model free control). The design of the latter is based on the Prescribed Performance Control Methodology. Theoretical design and validation via simulations are presented for all the proposed controllers, demonstrating the achievement of the robotic fingertip's rolling motion upon the contact surface which is the main control objective considered in this work. Experimental results are also given for some of the proposed controllers, further solidifying their effectiveness. Lastly, the achievement of the fingertip's rolling motion via one of the proposed control laws is utilized for the graspless manipulation of an object by a robotic finger, through application of a suitable tangential force. Specifically, simulation results are presented for a planar and a cylindrical object, demonstrating their successful manipulation that involves moving them to a desired target location and/or rotating them by a desired angle.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Droukas, Leonidas
  • Δρούκας, Λεωνίδας

Subjects

dc:subject × 12

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/38166

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Droukas, Leonidas; Δρούκας, Λεωνίδας. Έλεγχος εξασφάλισης κύλισης σε σφαιρικά ρομποτικά ακροδάκτυλα. Aristotle University Of Thessaloniki (AUTH), 2016. http://hdl.handle.net/10442/hedi/38166