National Technical University of Athens (NTUA)
Τροποποίηση διεπιφανειών για οργανικές φωτοβολταϊκές κυψελίδες και διατάξεις εκπομπής φωτός υψηλής απόδοσης
Abstract
dc:descriptionOrganic Optoelectronic devices, such as Organic Light Emitting Diodes (OLEDs) and Organic Photovoltaic (OPVs), consist of one or more conjugated organic films which are sandwiched between two electrodes, a transparent that is the anode of the device and a metallic cathode. It is an unfortunate fact that the dramatic progress that has been recently achieved in materials design and manufacturing has not been matched by the equal improvement in the interface engineering and no reliable interface-design criteria are available to device manufacturers. The objective of this thesis is the investigation of interface engineering of OLEDs and OPVs using Transition Metal Oxide films, in particular Molybdenum (Mo) and Tungsten (W) oxide films. At first, the deposition of molybdenum and tungsten oxides in various conditions is investigated. It was found that not only does the reduction of metal oxides alter their stoichiometry and electronic structures, but it also influences their morphological, optical and electrical properties. Specifically, the introduction of under-stoichiometry in the lattice of the Mo and W oxides results in the appearance of new occupied gap states near the Fermi level, which act as favorable paths for charge transport. Furthermore, OLEDs and OPVs have been fabricated using both stoichiometric and sub-stoichiometric molybdenum and tungsten oxide films as hole injection and extraction layers, respectively. The implementation of sub-stoichiometric Mo and W oxides as anode interfacial layers in OLEDs and OPVs leads to the improvement of the device performance, compared to devices with their stoichiometric counterparts. This increase may be attributed to a favorable energy-level alignment at the anode/organic film interface, due to the formation of occupied gap states near the Fermi level, resulting in the reduction of the hole injection/extraction barrier. Finally, under-stoichiometric molybdenum and tungsten oxide films are used as anode interfacial layers in OPVs after being subjected to microwave post-deposition annealing. It is demonstrated that a short exposure of under-stoichiometric Mo and W oxides leads to a shift of the work function towards higher values resulting in the enhancement of hole extraction and the improvement of the device performance. The microwave annealing of the oxide layer can also benefit the nanomorphology/crystallization of the photoactive layer, deposited on top of them, leading to enhanced hole transport properties, and thus increasing the electrical characteristics of the OPVs. These findings demonstrate the tremendous potential of under-stoichiometric Mo and W oxides with well controlled stoichiometry, which creates an advanced class of transition metal oxide-based functional materials with tailored electronic and physical properties. In addition, they may pave the way for finding new oxide formulations that can be used not only as highly efficient charge exchange/electrode modification layers in a wide range of optoelectronic devices, but also in other diverse applications, such as in photocatalysis.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Soultati, Anastasia
- Σουλτάτη, Αναστασία
Subjects
dc:subject × 8Rights
dc:rights- Statement dc:rights
-
- BY
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/38392