Back to search

University of Thessaly (UTH)

Numerical simulation of inelastic shell buckling and post-buckling behavior

Abstract

dc:description

The research in the present dissertation is aimed at developing advanced numerical tools for the simulation of shell buckling and post-buckling behavior, in the inelastic range. In particular, this work describes the development and the implementation of a J2 - non-associative plasticity model, which takes into account the "corner-like" effects at the loading point on the yield surface, and is suitable for shell buckling calculations.The main task of the present work consists of the development and the numerical implementation of a special-purpose constitutive model, suitable for large-scale structural stability computations within a finite element framework. The model employs von Mises yield surface (J2 - plasticity) and the rate form of J2 - deformation theory, it accounts for large strains, and leads to a non-associated flow rule. Special emphasis is paid on the continuity of plastic flow, to overcome numerical problems of convergence. The numerical implementation is conducted through both the backward-Euler and a forward-Euler substitution scheme, where stress and strain tensors are described in curvilinear coordinates, accounting for the extra constraint of zero normal stress through the shell thickness. The model is incorporated in a special-purpose nonlinear cylindrical shell finite element methodology, where the shell is described through a Lagrangian approach with convected coordinates and discretization is considered through a three-node “tube element”. The above technique is suitable for identifying bifurcation, investigating imperfection sensitivity and determining post-bifurcation behavior of the steel cylinder under compressive loads (uniform compression or bending). The numerical results are compared with available experimental data and analytical predictions and is demonstrated that the present methodology is capable of describing accurately and efficiently buckling and post-buckling behavior of rather thick-walled cylindrical shells in the inelastic range. Furthermore, wrinkling and post-wrinkling behavior of thick-walled high-strength seamless tubular (circular hollow section) members are presented in terms of both the ultimate load and the deformation capacity of typical cross-sections, in order to determine their ability to sustain load well above the first yield level. The results are aimed at evaluating the applicability of EN 1993-1-1 provisions for cross-sectional classification in the case of high-strength steel CHS seamless tubular members an issue of major importance for the design of tubular structures. The numerical results are compared with available experimental data, performed elsewhere.

Degree

thesis:*
Grantor dc:publisher
University of Thessaly (UTH)
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Pappa, Patricia
  • Παππά, Πατρικία

Subjects

dc:subject × 6

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/38417

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Pappa, Patricia; Παππά, Πατρικία. Numerical simulation of inelastic shell buckling and post-buckling behavior. University of Thessaly (UTH), 2016. http://hdl.handle.net/10442/hedi/38417