University of Crete (UOC)
Εκτίμηση των μορφομετρικών και εμβιομηχανικών παραμέτρων καθώς και των μηχανικών ιδιοτήτων του τοιχώματος για την εκτίμηση του κινδύνου ταχείας αύξησης ή ρήξης των μικρών ανευρυσμάτων της κοιλιακής αορτής
Abstract
dc:descriptionThe aim of the current analysis is to examine the value of orthogonal in contrast to axial diameter measurements and those of volumetric variables during abdominal aortic aneurysms (AAAs) examination. More importantly to investigate the role of biomechanic and geometric parameters to AAAs rupture risk and hopefully develop a model which could accurately estimate the risk of AAA rupture on an individualized, patient specific level, beyond the “one-size fits all” maximum diameter criterion.Although the mean difference between maximum diameter measurements on an axial or orthogonal plane is low, there is a wide range among cases, mainly observed in asymmetrical AAAs. We introduce “ShapeIndex” which is defined as the quotient of minor/major axis at the cross section presenting the maximum diameter. This may identify those cases which are more likely to be misestimated. CT measurements performed to establish AAA growth rates should consistently use either the axial or orthogonal technique to avoid possible inaccuracies.Growth rate of aneurysms regarding 3Dimensional indices of AAA and ILT volumes is significantly associated with the need for surgical intervention while the same does not hold for growth rates determined by 2Dimensional indices of maximum diameter and ILT thickness. Aneurysm volume is more sensitive in detecting aneurysm expansion than the traditional maximum diameter criterion.Analyzing a rare case presenting extremely rapid growth we postulate that aneurysm surface area under high stress and redistribution of stress against the posterior wall due to changes in geometric configuration and thrombus deposition over time may indicate a high risk profile.With the use of ECG-gated CT scan we found that throughout the cardiac cycle, aneurysmal wall deforms significantly less than non-aneurysmal wall and aneurysmal lumen, due to altered elastic properties and reduced loading. In large AAAs with larger amounts of ILT, the lumen deformation is comparable or even exceeds that of NAA and subsequently so does the distensibility of the Wall-ILT composite, an observation suggesting a thrombus cushioning effect.Regarding pattern of thrombus deposition inside the aneurysm sac our results indicate that posterior thrombus deposition is associated with significantly lower growth rate and lower posterior maximum wall stress compared to that of aneurysms with anterior thrombus deposition and could potentially indicate a lower rupture risk.Through a multi-factorial approach to aneurysms rupture risk, susceptibility to rapid enlargement and therefore a higher rupture risk can be predicted using a statistical model that takes into account thrombus eccentric deposition and relative volume along with neck-AAA angulation with an accuracy of 85%.
Degree
thesis:*- Grantor dc:publisher
- University of Crete (UOC)
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kontopodis, Nikolaos
- Κοντοπόδης, Νικόλαος
Subjects
dc:subject × 6Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/38432