Back to search

National Technical University of Athens (NTUA)

Μελέτη, κατασκευή και έλεγχος συστημάτων επαγωγικής μεταφοράς ισχύος

Abstract

dc:description

In this doctoral dissertation, an inductive power transfer system for electric vehicle charging is studied and constructed. Concerning the magnetic arrangement, a split transformer U-I shaped topology is proposed for incorporation in the front bumper of the vehicle. This topology presents desirable characteristics having to do with the minimization of the air gap, easiness of alignment, weight and cost reduction, in comparison with the commonly used circular arrangements attached on the ground. A frequency control strategy is proposed, achieving optimal system performance in both static and dynamic coupling conditions. Control is performed by a phase-locked loop (PLL) with optical communication between the two sides of the charger. The phase of the load current signal is optically transmitted to the primary, where the PLL synchronizes the inverter output voltage to that signal, ensuring operation at resonance. Experimental results on a prototype system show fast frequency response along with steady output voltage, in dynamically changing coupling conditions and load variations. The proposed control scheme is superior to other strategies in terms of stability, rapidity, safety of operation and steadiness of the output voltage level, in both static and dynamic charging applications.Αn asymmetric loading topology of the resonant secondary side circuit is proposed for increasing the power transfer capability of the system. Asymmetric loading is performed by a half-cycle short-circuit / half-cycle loading operation, in the secondary side of the inductive power transfer system. In this way, output power increase is achieved. The latter is caused by the reduction of the value of the load resistance as reflected to the resonant circuit, which leads to an increase in the quality factor of the resonant circuit, resulting in an increase in the power intake from a given voltage source. With the use of a capacitive output filter, additional increase in the transferred power is obtained, due to the relative load transformation. Simulations and experimental results verify the significant power gain in comparison with a system employing a full wave rectifier.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Gati, Eleni
  • Γατή, Ελένη

Subjects

dc:subject × 14

Rights

dc:rights
Statement dc:rights
  • BY_NC_ND
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/38569

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Gati, Eleni; Γατή, Ελένη. Μελέτη, κατασκευή και έλεγχος συστημάτων επαγωγικής μεταφοράς ισχύος. National Technical University of Athens (NTUA), 2016. http://hdl.handle.net/10442/hedi/38569