National Technical University of Athens (NTUA)
Επιφανειακή ενεργοποίηση λιγνιτικών τεφρών για την εφαρμογή σε προηγμένες μεθόδους οξείδωσης υγρών αποβλήτων
Abstract
dc:descriptionLignite ashes are widely abundant by-products of lignite combustion in power plants. The present thesis investigates the exploitation of fly and bottom ash (FA and BA), originating from Northern (Agios Dimitrios (AD)) and Southern (Megalopoli (M)) Greece for the production of value added materials and in particular the incorporation of lignite ash in adsorbents with photocatalytic properties for the decontamination of liquid wastes (mostly industrial) containing heavy metals and organic pollutants.For the development of the modified catalysts two “low cost” activation methods of lignite ashes were studied, using innovative techniques for the precipitation of TiO2 on their surface:a)the technique of hydrolysis and simple precipitation on lignite ashb)and simple coating of ceramic substrates produced from lignite ashes with TiO2 slurry.The physicochemical properties and the microstructure of specimens were studied with XRD, SEM-EDX, UV-Vis spectroscopy and AAS. The advantage of the produced materials is the easy removal and recovery of the catalyst from the liquid waste after the end of the decontamination treatment. In heterogeneous catalysis, using fly ash, the contained metal oxides and their crystalline phases might be activated and play a major role in the catalysis process.The combined wastewater treatment with heavy metals and dyes as pollutants was also studied with simultaneous adsorption (lignite ash) and heterogeneous (TiO2 and FA) photocatalysis. The final "waste" of the decontamination process can be further deposited in landfills.The obtained microstructures, during the process of hydrolysis and precipitation, were examined by XRD and SEM-EDX, and studied as a function of the grain size of the ashes, the solution pH, ageing time, coating percentage and sintering temperature of the product. The precipitation of TiO2 varies in the range of 20% to 75% and BA showed better results due to greater porosity and hence better penetrating capacity compared to FA. The experimental procedure revealed that the presence of CaOf in the ashes affects the amount of coated TiO2, as perovskite is produced. Specimens with higher granulometry increase Ti precipitation, the optimal ageing time is 1h and sintering temperature of 500oC satisfies the optimum rutile/anatase ratio. Furthermore, the impurities of the ashes should contribute to preventing the conversion of anatase to rutile at high temperatures, which is considered favorable for the photocatalytic action of the coated ashes.Microwave sintering can be an efficient, economic and valuable approach for the processing of powdery materials for ceramics manufacturing. For microwave processing FA, BA and mixtures of them were cold pressed to form a series of disc-shaped specimens and microwave sintering of them was carried out. The microstructures produced were characterized by means of XRD, SEM-EDX analyses and density measurements, and the effectiveness of the sintering process was evaluated. Subsequently the specimens were coated with TiO2 slurry and sintered to create a coherent coating at the optimum conditions. During the coating of ceramic surfaces apart from changes on their surface, variations in the mineralogical composition of the substrate of FAAD are observed due to free lime. Anhydrite and quartz are formed, while on the other hand the mineralogical composition of the substrates of BAAD, FAM and BAM are not affected.Lignite ashes and their formed specimens were studied for their efficacy regarding the adsorption of heavy metals (Cu, Pb, Cd and Zn) with AAS. No apparent differences in the adsorption capacity were observed between the lignite ashes and the specimens formed with the hydrolysis and precipitation process despite their surface activation with addition of TiO2. Their adsorption capacity is high and especially on Cu and Zn. A decrease of the adsorption capacity is detected at specimens of FAAD in the form of pellets after sintering and coating due to a decrease of surface activity of lignite ash during adsorption.Limited is also the elution of the adsorbed heavy metals from the specimens (less than 5%) which is encouraging concerning their application as adsorbents for heavy metals.Furthermore the absorption two dyes (methylene blue (MB) and methyl orange (MO)) were measured, using UV-Vis spectroscopy, in their aqueous solutions as a function of time. It was found that the combination of lignite ash with TiO2 enhances the properties of final activated product.Finally as far as it concerns the modified by TiO2 precipitation lignite ashes, it is observed that the existing pores on the non-activated ashes, were no longer all available for adsorption because to some extent they have been covered by TiO2. As a result the photocatalytic activity of TiO2 is promoted, compared to the adsorption, which is performed to a lesser extent. Another result of the photocatalysis of TiO2 activated lignite ashes is the disintegration and degradation of the pollutant. In the case of activated lignite ashes, and especially in the activated BAAD sample, a significant discolouration of the MB solution was observed. According to the results higher removal is achieved in the case of MB pollutant to cool daylight compared to MO pollutant to UV radiation (blacklight and blacklight blue).
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Katsika, Eleni
- Κατσίκα, Ελένη
Subjects
dc:subject × 31- Λιγνιτική τέφρα
- Ιπτάμενη τέφρα
- Υγρή τέφρα
- Κεραμικά υλικά
- Διοξείδιο του τιτανίου
- Προσρόφηση
- Βαρέα μέταλλα
- Προηγμένες οξειδωτικές μέθοδοι αντιρρύπανσης
- Ετερογενής φωτοκατάλυση
- Απορρύπανση υγρών αποβλήτων
- Lignite combustion products
- Lignite ash
- Fly ash
- Bottom ash
- Ceramics
- Titanium dioxide
- Adsorption
- Heavy metals
- Advanced oxidation processes
- Heterogeneous photocatalysis
- Wastewater treatment
- Επιστήμη Χημικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Χημεία και Τεχνολογία διεργασιών
- Περιβαλλοντική Μηχανική
- Διαχείριση και Διάθεση αποβλήτων
- Chemical Engineering
- Engineering and Technology
- Process Chemistry and Technology
- Environmental Engineering
- Waste Management and Disposal
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/38570