Aristotle University Of Thessaloniki (AUTH)
Μελέτη της ροής σε ανοιχτούς κεκλιμένους μικροαγωγούς
Abstract
dc:descriptionThe growing interest in microfluidics and the need for new designing correlations were the motivation of the present PhD thesis. Specifically the research interest is focused on the Falling Film Microreactor, one of the most important microfluidic devices for gas-liquid applications. After the literature review concerning FFMRs the thickness of the liquid film (H) and the shape of the interface have been recognized as key parameters for the design of such devices. With the aim of exploring the parameters which affect the operation of Falling Film Microreactors (FFMRs), the geometrical and hydrodynamic characteristics of the liquid phase, flowing in inclined open microchannels, have been investigated experimentally. Experiments have been conducted in three microchannels of different width (i.e. 1200, 600 and 300 μm) while distilled water, two aqueous solutions of glycerol and two aqueous solutions of butanol have been used as working fluids.As this is basically an experimental investigation, the choice of a suitable measuring technique is of crucial importance. In the present work, μ-PIV, a method widely used for velocity measurements in microconduits, is used for assessing the geometrical characteristics of liquid films in microchannels offering high accuracy and high spatial resolution. With this method a reconstruction of the gas-liquid interface can be made while the thickness of the liquid film can be also measured. Experiments concerning the investigation of the flow regimes confirmed the existence of three flow patterns i.e. corner rivulet flow, film flow with dry patches and complete film flow. During the investigation of the shape of the interface it was found that the capillary forces become very important in such narrow conduits and thus the interface has the shape of a flowing meniscus. For all the cases studied it was proved that the shape of this meniscus can be described with relative accuracy by a second order polynomial whose parameters are functions of the geometrical characteristics of the microchannel as well as the thickness of the liquid phase. It was also found that the film thickness strongly depends on the properties of the liquid and especially the viscosity. Great impact on film thickness found to have the reduction of the microchannel width and the inclination angle of the conduit. After dimensional analysis it was found that the film thickness is a function of three dimensionless numbers namely; Reynolds, Capillary and Froude, and a new correlation for the prediction of film thickness has been proposed.Except the geometrical characteristics of the liquid phase the hydrodynamics of the film was also investigated both experimentally and with numerical methods as well. Velocity profiles at the base of the meniscus found to decline from the parabolic shape as they present two velocity maxima near the side walls of the channel (“M”-shape profile). After combining experimental results and the data obtained from the CFD simulations it was found that this “M”- shape occurs when the ratio ‘meniscus height/film thickness’ is higher than 1.1. By summarizing the results of this thesis, we are able to propose a general strategy for the design of FFMRs.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2013
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Anastasiou, Antonios
- Αναστασίου, Αντώνιος
Subjects
dc:subject × 14- Μικροαγωγοί
- Ελευθέρως ρέουσα στιβάδα
- Μέτρηση ταχύτητας
- Διφασική ροή
- Microchannels
- Free falling film
- Velocity measurements
- Multiphase flow
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Mechanical Engineering
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/38663