Back to search

National Technical University of Athens (NTUA)

Μελέτη καθαρισμού βιομηχανικών αποβλήτων από μηχανική χαρτόμαζα

Abstract

dc:description

The occurence of heavy metals in aquatic recepients due to the unrestrained discharge of inefficiently treated industrial wastewater constitutes a major environmental problem. Over the last years, several conventional wastewater treatment processes have been employed for the removal of heavy metals from wastewater. Most of them while demonstrating high adsorption efficiency, especially when large volumes of effluents contain relatively high concentrations of heavy metals, they are characterized by high capital, operational and maintenance costs.In parallel, according to Council Directive 1999/31/EC on the landfill of waste, Greece is obliged to restrain the volume of biodegradable solid wastes which end up to landfills. The recovery of waste materials, in order to be recycled or reused, is included in the main principles of environmental policy. Paper, in specific, constitutes the second largest fraction of municipal solid wastes being originated from natural and renewable materials.Considering the aforementioned environmental policy and strategy issues, the present doctoral thesis aims to investigate the utilization of newspaper (waste paper) as a raw material for the development and application of a potential effective adsorbent for the removal of heavy metals Pb, Zn and Ni from aqueous solutions and wastewater. Primarily, the methodology being carried out was to investigate the removal of heavy metals by unproccessed (printed) newspaper. Aiming at the validity and repeatability of experimental results as well as high adsorption efficiency of newsprint paper (thermomechanical pulp), preparatory experiments of different pre-treatment stages (mechanical treatment process) were conducted. The final preparation process of adsorbent material included preparation methods such as homogenization, pulping, drying and sieving of newspaper. The produced mechanical pulp, at the end of the process, was homogenised with respect to fibres’ constituents (inks, fillers, inorganic elements) in order to gain increased specific surface area. The analysis of experimental results, in terms of metals’ removal efficiency of mechanical pulp, revealed that the enhancement of newspaper pulp adsorption efficiency was required. This was achieved by employing a chemical modification method.The characterization of mechanically and chemically treated pulps was mainly performed by the following analytical methods: XRF, FT-IR, TOC, SEM-EDX, XRD, ζ-potential and specific surface area. The methods contributed to the verification of chemical modification-treatment and the interpretation of comparative study results with regard to pulps’ adsorption efficiency.The study of heavy metals adsorption mechanism into pulps, was conducted through the investigation of the following parameters’ impact on pulps’ efficiency: metal species and initial metals’ concentration, solution pH and composition, presence of competitive cations, pulp type and dose, concentration of modification agent (citric acid), contact time and presence of suspended solids in wastewater. The adsorption system comprised of: solid phase-mechanically/chemically treated pulp, liquid phase-metal solution, batch reactor.A simple thermochemical procedure was successfully employed and involved the esterification reaction process. The modification procedure has not been applied to paper pulp yet. Citric acid was selected as modifying chemical reagent, which represents a weak polycarboxylic acid of low toxicity and contributes to chemical stability and improvement of pulp properties. Chemically modified pulp exhibited significantly higher adsorption efficiency compared to mechanicall treated one and achieved complete removal of metal ions at solutions of high initial metal concentrations. A comparative study of pulps’ adsorption efficiency with regard to metals removal was conducted in single and multi-component aqueous solutions. The selectivity of pulps towards metalls and the effect of the initial metals concentration were investigated through the study of competitive ions’ impact on pulps’ removal efficiency.Moreover, in the context of the possibility of the industrial application of mechanically treated pulp as a potential adsorbent, a comparative assessment of its performance in metal-bearing wastewater effluent and aqueous solutions was conducted. The pulp demonstrated lower adsorption efficiency in wastewater compared to aqueous solutions.The overall evaluation of mechanical pulp performance, necessitated the examination of regeneration and reuse of mechanical pulp in successive adsorption /desorption cycles. It was concluded that the high regeneration potential of pulp combined with high metal’s removal efficiency throughout ten regeneration cycles, rendered the adsorbent material more competitive and sustainable.To sum up, the application of mechanically and chemical treated pulp could contribute to the efficient treatment of metal bearing wastewater, while in parallel represents an alternative utilization and reuse technique of waste newspaper.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2013

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Pitsari, Stella
  • Πιτσαρή, Στέλλα

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/38664

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Pitsari, Stella; Πιτσαρή, Στέλλα. Μελέτη καθαρισμού βιομηχανικών αποβλήτων από μηχανική χαρτόμαζα. National Technical University of Athens (NTUA), 2013. http://hdl.handle.net/10442/hedi/38664