Back to search

National Technical University of Athens (NTUA)

Επίδραση πρόσθετων-προσμικτών στην διάβρωση του χάλυβα οπλισμού του σκυροδέματος

Abstract

dc:description

The object of this thesis is the experimental study and investigation methods of protection of steel reinforcement. The methods of protection tested were : Corrosion inhibitors (for admixture and sprayed inhibitor) and the cathodic protection -sacrificial anodes. It is done comprehensive review for the word concrete and cement and it is developed in detail the factors that affect the properties and their ways of preparation. The study of protection, applied in three different types of essays, including essays reinforcements encased in concrete. In the first category has been added to the composition of the concrete as a corrosion inhibitor admixture in two different strengths (0,1 g/100g cement and 0,4 g/100g cement) . In the second category is added to the outer surface of the concrete as a corrosion inhibitor sprayed at two different concentrations (0,1 g/100g cement 0,4 g/100g cement). The third category in the manufacture of essays added in sacrificial anode Zn in two ways. Firstly, connected with the two rebars of the four rebars of essay with iron wire, so as to ensure contact between the sacrificial anode Zn and rebars. Secondly, connected with the two rebars with Sheet zinc. Examined the cathodic protection with sacrificial Zn anode positioned inside the specimen. For comparison, we studied the corrosion of steel encased in mortar without corrosion inhibitor and without any admixture. The protective ability of these methods of protection compared to the unprotected steel was evaluated by the following methods: Measuring linear polarization resistance, corrosion potential versus time, mass loss, measurement of chloride ( in concrete), the resistance of materials to impact and measuring electrochemical mass loss. From this thesis resulted in the following conclusions: The best protection for essays reinforcement provides the team with the sacrificial anode Zn in water environment . The dynamic of this group remain at prices below -350mV for more than one year stay of specimens in a corrosive environment. Also, the results for the group containing sacrificial anode sheet Zn are well, which is glued with special glue onto the rebar. The category of inhibitor additive for content 0,4 g/100g creates protection up to 26.6% compared with the reference. Also the content 0,1 g/100g cement protects up 16.6%. The category of sprayed inhibitor caused less protection than the three above, but protected up to 13.1% for 0,4 g/100g cement content and the content of 0,1 g/100g cement protected 10.09% based on the loss mass.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Zacharopoulou, Angeliki
  • Ζαχαροπούλου, Αγγελική

Subjects

dc:subject × 16

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/38681

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Zacharopoulou, Angeliki; Ζαχαροπούλου, Αγγελική. Επίδραση πρόσθετων-προσμικτών στην διάβρωση του χάλυβα οπλισμού του σκυροδέματος. National Technical University of Athens (NTUA), 2009. http://hdl.handle.net/10442/hedi/38681