Back to search

National Technical University of Athens (NTUA)

Επίδραση των κύριων συστατικών σύνθετων τσιμέντων στη συμπεριφορά τους σε υψηλές θερμοκρασίες

Abstract

dc:description

In the recent decades a growing trend has been observed in cement production in the use of other materials, apart from clinker and gypsum, and composite cements undoubtedly improve their properties. The European standard EN 197-1 (2000) defines as composite cements, cements Type II which may contain various additives at concentrations of 6% to 35%, such as pozzolanic materials, fly ash, blast furnace slag and limestone. An issue that arose, especially after the outbreak of extensive fires in buildings and tunnels, is whether the composite cements exhibit improved durability under extreme thermal conditions, where physicochemical changes occur resulting in cracking and partial or total destruction.The published work so far mainly focuses on the effect of high temperature on the behavior of concrete mainly in ordinary cement. However, the study of the behavior and durability of concrete under fire conditions requires complete knowledge of the behavior of each component at high temperature. This thesis examines the behavior of composite cements and mortars after their exposure to temperatures up to 1000°C. The main components used were fly ash, natural pozzolanas, limestone, blast furnace slag and metakaolin. Initially chemical and mineralogical changes caused in cement pastes are identified, as well as changes in the microstructure. Then the behavior of mortars with limestone and blast furnace slag at high temperature is examined. The aim of this study is to investigate the influence of the main ingredients and the type of sand on the thermal resistance of composite cements and mortars.The experimental procedure involves apart from the selection of raw materials, the manufacture of blended cement pastes and mortar specimens, maintenance and heat treatment in a range of different temperatures. The results include measurements of compressive strength, mass loss calculations (TG-SDTA), ultrasonic pulse velocity measurements for the identification of chemical compounds with XRD, Scan Electron Microscopy (SEM) measurements for mineralogical information on the structure of the specimens and their physicochemical changes. Finally, visual inspection of samples took place and N2 porosimetry was used to calculate the pore size.The above research revealed that the physicochemical changes during the heat treatment of the composite cement pastes are directly dependent on the type of the other main components that have been added to the Portland cement. Specifically, during the removal of chemically bound water (100-600°C), significant weight loss, increased porosity and microcracks were observed. At higher temperatures the formation of new anhydrous phases was recorded. The gehlenite (Ca2Al2SiO7) is the main phase in the specimens with metakaolin which has the highest content of SiO2 and Al2O3. The greater weight loss in the composite cement pastes was recorded up to 600°C but the greatest external cracking was observed after 600°C and is associated with the high content of free CaO which is converted to Ca(OH)2 during the cooling process. It is noted that cements containing pozzolanic materials show better consistency after the heat treatment. Also, the mortar specimens exhibit better behavior from the respective pastes, with less weight loss up to 600°C due to the small contribution of cement in the composition of the mortar. Finally it is observed that the addition of pozzolanic main components improves the durability of the cement mortars, which maintain their initial strength at 38-47% at 600°C. The best behavior showed the cement with metakaolin, while the worst the one with limestone.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2013

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Benekis, Vasilios
  • Μπενέκης, Βασίλειος

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/38696

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Benekis, Vasilios; Μπενέκης, Βασίλειος. Επίδραση των κύριων συστατικών σύνθετων τσιμέντων στη συμπεριφορά τους σε υψηλές θερμοκρασίες. National Technical University of Athens (NTUA), 2013. http://hdl.handle.net/10442/hedi/38696