National Technical University of Athens (NTUA)
Παρασκευή, χαρακτηρισμός και μελέτη ελαστομερών πολυμερικών συστημάτων ελεγχόμενης αποδέσμευσης φαρμάκων
Abstract
dc:descriptionThe present work refers to the preparation, characterization and study of elastomer-based matrix controlled release systems in which the bioactive solute is incorporated in the polymeric matrix. The main goals of this work were the systematic study of the effect of a hydrophilic additive with mild osmotic action on (i) the curing reaction of the polymer as well as on the properties of the final cured membranes, and especially on the water uptake ability and (ii) the release of bioactive solutes characterized with different water solubility. Furthermore, in an attempt to achieve a constant rate three- layer devices were prepared and their release performance has been simulated with a theoretical model that has been developed in our laboratory at Demokritos. As representative hydrophobic polymer, a commercial polydimethylsiloxane, PDMS was used. PDMS, type RTV615, kindly supplied by Momentive in a two-component silicone kit (part A and part B), consists of a vinyl-terminated prepolymer with high molecular weight (part A) and a crosslinker, containing several hydride groups on shorter chains (part B). Curing of the PDMS occurs via Pt-catalyzed hydrosilylation reaction to form a densely crosslinked polymer network. As hydrophilic additive, PEG of MW=3000 was used, while the bioactive solutes were five derivatives of xanthine (theobromine, theophylline, caffeine, diphylline and proxyphylline) which although they are structurally very similar, are characterized by different acqueous solubilities. From a series of experiments it was found that PEG hinders partially the crosslinking reaction of PDMS and changes the final properties of the cured membranes. However, in this dissertation these changes may be considered positive in terms of the desired increased bulk hydrophilicity of the polymeric blend. The comparative study of the release of theobromine, theophylline and caffeine from PDMS matrices indicated that the release of these drugs is mainly controlled by a diffusion mechanism. Regarding the other two highly hydrophilic drugs, diphylline and proxyphylline it was found that they provoke swelling of PDMS matrices due to water ingress during the release process. As a result, their release from PDMS matrices is affected by additional factors. Upon inclusion of PEG in the matrix an enhancement of the release rate is observed for theobromine, theophylline and caffeine. In the case of diphylline and proxyphylline, PEG inclusion and the additional water uptake, does not have any significant influence on their release from PDMS-PEG matrices. The effect of different PEG contents on the release process of theophylline was studied. It was observed that with increasing PEG content, theophylline release was accelerated systematically. I n an attempt to stabilize the release rate, symmetrical three-layer devices were constructed. These devices consisted of three layers with the same PEG content (10% w/w). Theophylline was incorporated only in the inner layer in two different concentrations. Release experiments indicated that the use of multilayer devices instead of monolithic ones leads to significant stabilization of the rate of theophylline for more than 80% of the amount released. The experimental results were simulated according to a mathematical model developed in Demokritos laboratory where the data derived from release experiments from monolithic matrices were used as input parameters in the said model and it was proven that this parameterization can successfully reproduce the performance of the experimental multilayered systems. Thus, it was demonstrated that, by conducting a minimum set of lab experiments on single- and multi-layer devices, mathematical modeling may be used in various steps of the design of a particular polymer matrix – solute system.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2014
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Panou, Athanasia
- Πάνου, Αθανασία
Subjects
dc:subject × 20- Πολυδιμεθυλοσιλοξάνη
- Πολυαιθυλενογλυκόλη
- Υδρόφιλη τροποποίηση
- Δικτύωση ελαστομερών
- Μίγματα πολυμερών
- Ελεγχόμενη αποδέσμευση
- Μεταφορά φαρμάκων
- Πολυστρωματικές δομές
- Polydimethylsiloxane
- Polyethylene glycol
- Hydrophilic modification
- Crosslinking
- Blends
- Controlled release
- Multi-layer devices
- Drug delivery systems
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/38702