National Technical University of Athens (NTUA)
Σχεδιασμός, παρασκευή και μελέτη νανοσυνθέτων υλικών πολυσιλοξάνης για βιοϊατρικές εφαρμογές
Abstract
dc:descriptionSilicones are a class of polymer with many biomedical applications, such as maxillofacial prostheses, implants in plastic surgery, carriers in drug delivery systems and components in medical equipment. This type of elastomer exhibits high thermal and oxidative stability at high temperatures and maintain its elasticity and flexibility at very low temperatures. However, silicone polymers are characterized by poor mechanical properties and, therefore, reinforcing fillers must be added to overcome this drawback. The incorporation of fillers with particle size in the nano-scale has an influence on the properties of the deriving composites, even at very low concentrations, which ensures the retention of the other intrinsic properties. In the present study, hybrid polysiloxane systems containing inorganic nanoparticles were prepared, in an attempt to upgrade thermo mechanical properties and biocompatibility and to optimize their behavior in biomedical applications. Hydroxyl and vinyl terminated poly(dimethylsiloxane) (PDMS), following condensation and addition reaction respectively, were the silicone base elastomers used in this work. The molecular weight of the silicones matrices was another parameter studied in this work. Various types of fillers were used, i.e. an organically modified montmorillonite, under the trade names Cloisite 20A and Cloisite 30B, unmodified montmorillonite, treated silica, hydroxyapatite and bioactive glass. In order to identify the appropriate system for each biomedical application and, furthermore, to determine the design parameters that may affect the overall performance of the material, some critical properties of the hybrid silicone systems were studied.The effect of the filler on the vulcanization process is a key parameter for designing nanocomposites, as it affects the manner and time of molding and, furthermore, the structure and properties of final products. There are a limited number of reports in the literature, on the effect of filler on the vulcanization process of elastomers and more specifically of polysiloxanes. In our work, the effect of various inorganic reinforcing fillers on the curing reaction of condensation type PDMS was studied by Brookfield viscometer, differential scanning calorimetry (DSC) and infrared spectroscopy (FTIR-ATR).From the results of the above study, it was found that the introduction of all types of fillers, leads to faster reaction rate and completion, compared to that corresponding to pure polysiloxane, whereas this effect becomes stronger as the molecular weight of the matrix increases. The vulcanization reaction of medium molecular weight polysiloxane, as well as of its nanocomposites, was recorded through DSC experiments with sinusoidal heating rate, by varying the enthalpy of "cold" crystallization transition. It was observed that a decrease of the enthalpy of crystallization takes place, due to the increase of cross-linking sites, which restricts the mobility of free chain ends. A reduction of the reaction rate for pure PDMS was observed for the first 200min, followed by an acceleration of the reaction, whereas the hybrid systems showed a rather linear progress of the cross-linking reaction. The comparative study of the effect of various fillers showed that modified silica greatly accelerates the reaction, as compared with the system of pure polysiloxane, followed by the modified montmorillonite Cloisite 20A and modified montmorillonite Cloisite 30B. The curing reaction was further studied by ATR-infrared spectroscopy, as well as by FTIR, focusing on the change of the peak area 1200-900 cm-1, which corresponds to vibration of new cross-linking sites (Si-O-Si).The effect of various inorganic fillers on the vulcanization of vinyl terminated polysiloxane was studied via the reaction exotherm recorded by DSC, as well as from the changes of absorption peaks obtained by infrared spectroscopy. From the results of DSC under isothermal and non-isothermal conditions, it was found that the introduction of unmodified montmorillonite into the silicone base elastomer accelerates the vulcanization reaction, as compared with pure PDMS. The same effect takes places with hydroxyapatite, silica and Cloisite 20A hybrids in descending order. There is a retardation in the curing rate and the completion of reaction by Cloisite 30B nanocomposites, which is associated to the increased of elastomer polarity caused by the organic modification. For the calculation of kinetic parameters, such as activation energy, an autocatalytic model, the Kissinger and Ozawa equations were adjusted to isothermal and non-isothermal data, respectively. An extensive study of the thermomechanical properties was also made, in order to correlate the structure and properties of these nanocomposites. The resulting structure of montmorillonite nanocomposites was studied by X-ray diffraction (XRD) and it is confirmed that polymer chains penetrate between flake platelets and, as the content of organic modification increases, it is easier to disperse the filler into the polymer matrix. From thermogravimetric analysis (TGA) it was found that the introduction of the two organically modified clays (Cloisite 20A and Cloisite 30B) in condensation polysiloxanes, independently of their molecular weight, led to significantly enhanced thermal stability of the obtained nanocomposites, as suggested by the increase of the onset and maximum degradation rate temperature in all examined concentrations from 10-30oC. A similar behavior was determined with the incorporation of nano hydroxyapatite, whereas the incorporation of silica and bioactive glass reduced the thermal stability of the material. The incorporation of the two types of organically modified montmorillonite (Cloisite 20A and Cloisite 30B) to addition polysiloxane matrix, led to a reduction of thermal stability compared to pure polysiloxane. As observed by DSC, the introduction of all types of fillers used in this work, decreases the temperature of «cold» crystallization in condensation and addition polysiloxanes of all molecular weights, whereas the glass transition and melting temperatures remain intact. In addition, there is a small tendency of decrease in the crystallization and melting enthalpies of the nanocomposites as compared with pure silicone.In order to study the mechanical properties of the polysiloxane nanocomposites, tensile stress tests were conducted. The addition of Cloisite 20A to the low molecular weight condensation polysiloxane nanocomposites leads to higher increase of tensile stress as compared with that of composites with bioactive glass, silica and Cloisite 30B, while hydroxyapatite does not present a reinforcing effect. The modulus of elasticity greatly increases by the incorporation of the two types of organically modified montmorillonites as well as with silica, but remains almost stable by the addition of hydroxyapatite and bioactive glass. The reinforcing action of the studied commercial montmorillonites is also confirmed in the higher molecular weights of condensation polysiloxane, with Cloisite 20A showing the maximum reinforcing effect. In the addition type polysiloxane nanocomposites a small increase of mechanical properties was observed, with Cloisite 20A being again the best reinforcement. On the other hand, the modulus did nοt show any significant change within the range of the studied systems. The surface hardness and resistance to tearing of the nanocomposites are increased, in all the studied samples. The incorporation of Cloisite 20A led to higher values in all the range of molecular weights of both types of polysiloxane, as compared to the other types of fillers studied in this work. A small decrease in the tear resistance was determined in the composites of silica and hydroxyapatite.In order to explore the effect of the polysiloxane network density on the properties of the reinforced hybrid systems, swelling experiments in toluene at room temperature were run. From the above experiment, it is observed, a decrease in the percentage of swelling, in all types of polysiloxane as well as with the introduction of all types of fillers, while this decrease is enhanced as the concentration of nanofiller increases. A significant decrease of the swelling ratio in composites of condensation polysiloxanes reinforced with Cloisite 20A was observed, in comparison to the nanocomposites with Cloisite 30B. Moreover, the incorporation of silica and hydroxyapatite leads to a significant decrease of swelling ratio, in comparison to the pure polysiloxane.All the examined polysiloxane nanocomposites were tested for their behavior in selected biomedical applications, considering biocompatibility and other critical design parameters. Regarding the clinical problems encountered in the use of silicones in maxillofacial prosthetics applications, accelerated aging experiments were conducted in condensation polysiloxanes and their nanocomposites reinforced with organically modified montmorillonite (Cloisite 30B) and in reference specimens of pure silicone. The results of this study, suggest that reinforcing of pure silicone with organically modified montmorillonite Cloisite 30B leads to more stable structures with a smaller decrease of mechanical properties. Furthermore, the density of polymer network is diminished after the exposure of pure silicone to accelerated aging, while this parameter seems to remain unaffected in the case of the respective nanocomposites. It can be concluded by the study of the total color change, that the introduction of Cloisite 30B highly improves the color stability of the yellow and green pigmented polysiloxane.Furthermore, the release of hydrophilic metronidazole from polysiloxane systems and the corresponding nanocomposites with Cloisite 30B was investigated. The incorporation of the organically modified montmorillonite reduces the release rate and limits the “burst” effect. The increase of molecular weight of polysiloxanes, which is associated with a decrease of the network density, decreases the rate and the of release rate, which shows that the diffusion is not the main transport mechanism of metronidazole, for this specific matrix system.This behavior can be due to the formation of propanol, a by-product of the vulcanization reaction, whose concentration increases with the increase of hydroxyl end groups in the low molecular systems, as well as with the mechanism of solvation of the drug and the creation of channels that contribute to the process of diffusion. Comparing the two different types of polysiloxane, it is found that low molecular weight addition polysiloxane leads to lower levels of drug release as compared with the corresponding molecular weight of condensation polysiloxane.Immersion in simulated body fluid experiments was performed, in order to identify the creation of hydroxyapatite on the surface of the material, for the in-vitro investigation of bio-compatibility of the hybrid polysiloxane systems. The presence of calcium phosphate after 40 days of immersion in the fluid is ascertained by the results obtained by scanning electron microscopy. This behavior is also confirmed by FTIR. Scanning electron microscopy coupled with elemental analysis EDAX, showed hydroxyapatite surface cores, in all the examined systems, particularly after 40 days of immersion in the solution. This observation is important because the formation of hydroxyapatite layer favors the interfacial bonding of polysiloxane prostheses and implants with the surrounding bone and soft tissues.Finally, the cell viability (fibroblasts 3T3 and osteoblasts MG 63) was performed by the quantification of active mitochondrions in the studied cells (MTT assay) and by the study of cells morphology with an optical microscope. From the obtained results, it is indicated that the presence of all examined fillers leads to an increase of cell viability as compared with the environment of pure polysiloxane, leading at the same time to strong cell attachment, especially after the first 24 hours. In addition, biocompatibility was correlated with the type of filler and the type of the examined cell cultures.In this work, it was studied the vulcanization reaction for various condensation and addition type polysiloxane nanocomposites with different techniques and useful data for the design and control of reaction were obtained. In addition to the characterization of the structure and thermomechanical properties of silicone nanocomposites containing montorillonite, critical properties for their biomedical applications were investigated. Moreover, a comparative study was made with composites reinforced with other bioactive ceramics, such as bioactive glass, a filler recently referred to as a mean of modification of biodegradable biomedical polymers. Various design parameters were examined, regarding the type of silicone and filler, which will provide the tools for optimal design of final products based on biomaterials. Consequently, the use of the appropriate type of montmorillonite as biomedical silicone filler might ensure highly upgraded thermal stability, high mechanical strength as well as biocompatibility similar to that provided by other bioactive fillers (hydroxyapatite and bioactive glass). Bioactive glass is a new alternative for the modification of biomedical polysiloxanes, despite the fact that it does not significantly improve the mechanical behavior but enhances biocompatibility of polysiloxane matrix.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2013
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Vasilakos, Sozon
- Βασιλάκος, Σώζων
Subjects
dc:subject × 12Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/38710