Aristotle University Of Thessaloniki (AUTH)
Airflow and particle deposition in a dry powder inhaler.: a CFD and particle computational approach
Abstract
dc:descriptionDry Powder Inhalers, DPIs, are common asthma treatments and a principle means of delivering pharmaceuticals, due to their ease of use and cost-effectiveness. The main function of a DPI device is the adequate dispersion and delivery of particles initially in the form of a loose powder. The air flow inside the DPI is developed by the pressure difference on the mouthpiece that is imposed by the user. Under the action of airflow the pharmaceutical powder is broken up and released in the form of aggregates and particles. The effective release and dispersion of powder inside the inhaler depends on the characteristic properties of the powders and the material of the DPI walls (e.g. cohesion and adhesion forces, density, particle size distribution) and from the dynamic flow field that develops during inhalation. The main problems of DPIs are drug losses due to deposition in the device, the incomplete development of flow due to the inability of the user to apply the necessary pressure difference, and insufficient breakup into fine particles.The outflow from the DPI mouthpiece is highly important. The characteristics of the outflow stream determines the dispersion and flow behaviour of the particles directed to the oral cavity and consequently influences particle losses in the orolaryngeal region as well as the amount of fine particles that reach the upper respiratory tract. The air and particle flow fields emitting from the DPI mouthpiece, the total number of emitted particles (and therefore drug) and the Fine Particle Fraction (FPF) are the main characteristics of the outflow from the DPI mouthpiece. In most commercial DPI devices, complex and transient flow structures have been observed from laminar to turbulent. However the computational study of the flow fields in DPIs conducted so far have been insufficient and the transport of particles has hardly been studied at all. Furthermore, no computational results on total drug losses due to particle deposition on the DPI walls nor the FPF have been reported. In this thesis the operation of a commercial DPI device, (i.e., Turbuhaler) under conditions of steady and dynamic flow is described in detail using a multi-level computational model based on Computational Fluid Dynamics, CFD. For the first time the total losses of particles (drug) and the FPF are computed for a wide range of operating conditions. The DPI geometry is constructed in a CAD/CAM environment (i.e., CATIA v5) and is then imported into GAMBIT where it is discretized into a computational grid. The Navier-Stokes equations are solved using a commercial CFD software (i.e., FLUENT v6.3). Particle motion and deposition are described using an Eulerian-fluid/ Lagrangian-particle approach. Particle collisions with the DPI walls lead to rebound or deposition according to a particle/wall interaction model. Powder dispersion was assumed to occur instantaneously based on a simple release model. For dynamic simulations, the flow and particle motions equations are solved simultaneously and the pressure difference in the outflow changed with time. This thesis examines the air flow and particle deposition in a wide range of mouthpiece pressure drops (e.g. 800-8800Pa) which correspond to the volumetric flow rates developed in practice (e.g. 20-70L/min). Also, the main features of the outflow are determined, e.g., the dynamic and total fraction of fine particles, and the emitted air and particle flow fields. Finally, the spatial distribution of deposited and emitted particles are determined.It should be noted that this is the first time that such results are reported in the open literature. The computational results were considered highly satisfactory in comparison with literature data considering the dispersion of the available experimental data and the complexity of the problem. It is noteworthy that the comparison was performed without any adjustment of model parameters.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2012
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Milenkovic, Jovana
- Μιλένκοβιτς, Γιόβανα
Subjects
dc:subject × 14- Εισπνευστήρα ξηράς σκόνης
- Υπολογιστική ρευστοδυναμική
- Επικοδίση σωματιδίων
- Κλάσμα Λεπτών σωματιδίων
- Dry powder inhaler
- Computational fluid dynamics
- PARTICLE DEPOSITION
- Fine Particle Fraction
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Βιοϊατρική Μηχανική
- Engineering and Technology
- Chemical Engineering
- Medical Engineering
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/38741