National Technical University of Athens (NTUA)
Διερεύνηση των γεωτεχνικών παραμέτρων που ελέγχουν τις καταπτώσεις βράχων
Abstract
dc:descriptionRockfalls in areas with human activity can cause important problems with unfavorable social and economic repercussions. Several events have occurred recently in Greece, some with human fatalities Rockfalls constitute a natural hazard that is expressed as the sudden and violent downward movement of rocky blocks, which is gravitationally driven and follows their detachment from their initial position on the slope surface. While the blocks interact with the slope surface, velocity losses occur during impact, rolling or sliding. Rebound response is the most difficult part to predict and its understanding is limited, therefore simulation relies on simplified assumptions. In general, the post-impact part of the trajectory is estimated according to the coefficients of restitution, which describe the velocity or energy losses caused by the impact.Various definitions for the coefficients of restitution exist in relevant literature, but there is no consensus on which is most appropriate for rockfall trajectory modelling. Their values are usually acquired as a function of the material type, from characteristic values which are considered to be material constants. However, due to the several parameters which influence block’s response, a significant scatter is revealed when examining values acquired by different studies.Hence, this research is based on systematic experimental observations and inductive reasoning. Moreover, experimental apparatuses where developed, allowing parametrical investigation of the rebound process. A significant number of tests were performed in the laboratory as well as in the field. Results were used to address the influential parameters and to express empirical correlations and methodologies for the estimation of the trajectory’s characteristics after impact.A test for the determination of the coefficients of restitution can be easily performed, since it requires the release and impact of a block towards a surface while recording the trajectory. However, there is not any suggested method for such a test, resulting to a difficulty in assessing relevant studies.Tests were performed with natural rocks and artificial materials, whose properties were determined according to relevant standards. Artificial materials present advantages regarding specimen construction and digital processing. Various block shapes were used and released to free fall or parabolic motion onto surfaces with different characteristics.In general, the motion is completed within a short time span, therefore its recording is usually performed by high speed cameras. In this research, particular attention was paid to the tracking process of the block by integrating machine vision techniques. This drastically increased tracking accuracy and reduced the required processing time, compared to manual tracking. This allowed the implementation of numerous tests in the laboratory, where specific parameters were isolated in order to determine their effect.Although the phenomenon is evolving in the three-dimensional space, the third dimension was rarely taken into account until recently in relevant studies or commercial simulation software. In this investigation the reconstruction of the trajectory in the 3D space, was achieved by applying stereo-photogrammetric techniques in the processing of records, thus allowing the consideration of blocks deviation after impact.The laboratory investigation consists of approximately 3000 tests, where the effects posed by material’s physical and mechanical properties and by the motion’s characteristics before impact were examined. Regarding the individual blocks, the effect of mass, shape, velocity and impact angle were examined. For the impact surfaces the following effects were taking into account: roughness, weathering, soil cover and the differentiation of the material relative to that of the blocks. Additionally, the effect of the orientation of the impact surface relative to the direction of the trajectory of the blocks was also investigated.Field tests were done in three phases, where about 300 tests were executed in total. The purpose was to examine the possibility of extrapolating the findings of the aforementioned extensive laboratory investigation to the scale that the phenomenon takes place. Thus, tests were carried out by reproducing, as possible, the laboratory conditions in the field.Generally, the results of this study are in agreement with those mentioned in the relevant literature. However, given the number of tests and the parameters investigated, the interaction between them is revealed. Thus, current results complete, or in some cases review, the existing knowledge regarding the crucial parameters and the mechanisms that affect the response of the block. Additionally, new methods for estimating the trajectory following the impact are proposed.In particular, a correlation is expressed in order to estimate the normal restitution coefficient, for the simple case of the one dimensional motion of a spherical block, taking into account Schmidt hammer hardness and the momentum at impact. The effects of block’s shape and impact angle are introduced, through correctional factors, allowing the generalization to the common case of an irregular block at an oblique impact. Additionally, a methodology is established for determining the variation of normal coefficient of restitution and rebound angle based on the characteristics of the impact, from which trajectory after impact can be accurately estimated. Finally, an empirical relationship is proposed for the estimation of deviation range followed after impact, taking into account the direction of the trajectory prior to impact in respect to dip and aspect of the impact surface.The derivation of these correlations and methodologies was based on the laboratory investigation, while the field tests were used to assess their reliability. Since the response of the blocks in the field tests is approximated sufficiently well by the proposed relations, it is concluded that their generalization to the real scale of rockfall phenomenon is possible and therefore they can constitute useful tools for the rational design of rockfall countermeasures.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Asteriou, Pavlos
- Αστερίου, Παύλος
Subjects
dc:subject × 16- Καταπτώσεις βράχων
- Συντελεστές αναπήδησης
- Εργαστηριακή και επιτόπου διερεύνηση
- Επίδραση φυσικών και μηχανικών παραμέτρων
- Rockfalls
- Coefficients of restitution
- Laboratory and field tests
- Effect of physical and mechanical properties
- Φυσικές Επιστήμες
- Γεωεπιστήμες και Επιστήμες Περιβάλλοντος
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Πολιτικού Μηχανικού
- Natural Sciences
- Earth and Related Environmental Sciences
- Engineering and Technology
- Civil Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/38804