Agricultural University of Athens
Μελέτη επίδρασης βιοϋμενίων τροφιμογενών παθογόνων ως παραγόντων διασταυρούμενης μόλυνσης σε οικιακό περιβάλλον
Abstract
dc:descriptionQuantification of common cross-contamination scenarios encountered in households and identification of the factors that may affect the transfer of foodborne bacteria through contact surfaces provides a scientific basis for risk management. The initial aim of this study was to investigate, through an online survey, Greek consumer’s attitudes, opinions and self-reported practices during food handling that may compromise food safety and lead to foodborne illnesses. In the meantime, the acknowledgment on behalf of the tested consumers of common foodborne pathogens and the prevalence of foodborne illness during the last 12 months was determined (CHAPTER 3). The educational level and employment status seemed to influence the acknowledgment of consumers concerning food safety, however gender, age and incidence of foodborne illness during the last 12 months had no impact. Although, according to the survey findings, the majority of consumers acknowledge the importance of personal hygiene, decontamitation of kitchen equipment, food preparation and prevention of cross contamination, a considerable proportion of the participants also admit the embracement of inappropriate food-handling practices. Given the above, the transfer potential of common foodborne pathogens (Salmonella enterica ser. Typhimurium, Escherichia. coli O157:H7 and Listeria monocytogenes) from contaminated raw meat through various surfaces (i.e. stainless steel, polyethylene and wooden) to other food of animal- or plant origin was assessed (CHAPTER 4). Results revealed that all the factors examined, i.e. the bacterial species, the size of initial inoculum, the contact time, the type of surface and the number of fillet influenced the degree of transfer of pathogens to subsequent fillets. All non-inoculated fillets were contaminated with a progressive reduction trend in pathogen population levels from the inoculated fillets to the sixth non-inoculated ones that got in contact with the surfaces, regardless of the initial inoculum. Wooden surfaces enhanced the transfer of bacteria to subsequent fillets compared with other materials after 15 min of contact. S. Typhimurium was transferred at lower rates to contaminated fillets than E. coli O157:H7, followed by L. monocytogenes.According to the consumers’ survey, various practices and attitudes towards washing of food contact surfaces have been recorded among different individuals and a considerable proportion of the participants admitted the use of common cutting boards for raw meat and fresh produce. Hence, taking into consideration the main factors that affect bacterial transfer, the objectives of the next study were to investigate S. Typhimurium cross-contamination from inoculated beef fillets to tomatoes through cutting boards and knives (i) without intermediate cleaning of kitchen equipment and (ii) under three decontamination scenarios that may be practiced in households: rinsing only with tap water, washing/scrubbing with detergent and using a commercial antibacterial product (CHAPTER 5). Data derived from this study revealed that rinsing only with tap water was not able to reduce the bacterial load to safe levels. On the other hand, thorough mechanical washing of surfaces with water and detergent turned out to be efficient in considerably reducing cross-contamination between raw meat and fresh produce, at least with regard to polyethylene and stainless steel surfaces. With particular reference to the surfaces’ materials, given their difficult decontamination and the potentially high transfer of pathogens to biotic surfaces, as illustrated by the results of this study, the use of wooden cutting boards should be avoided.Based on the aforementioned discussion, it is concluded that a significant factor associated with cross contamination events in the domestic environment is the remaining population of pathogenic cells on abiotic surfaces, following inadequate cleaning and disinfection procedures. During the processing of contaminated raw materials bacteria may deposit to surfaces and form multispecies biofilms. Biofilms are one of the major issues related to food safety concerns and once established, biofilms generally exhibit increased resistance to antimicrobials, thus creating the potential for reoccurring contamination events as outer layers of the biofilm slough off into the surrounding environment. In this study two strategic approaches were evaluated to confront biofilms: prevention and eradication. Materials that change surface properties is a way to prevent attachment and reduce the formation or enhance the dispersion of biofilm, while the use of disinfecting agents is a way to eradicate already formed biofilms. To this direction, the characterization of the biofilm formation of S. Typhimurium and S. aureus (3 strains each) was evaluated on stainless steel surfaces, under mono and dual-species conditions. In addition, the efficacy of 3 different chemical antimicrobial compounds (benzalkonium chloride, BC, peroxyacetic acid, PAA and sodium hypochlorite, NaClO) was investigated (CHAPTER 6). Results showed that dual-species conditions lead to a significant reduction in the number of sessile cells, compared to mono-species conditions. Regarding the disinfection resistance, in general BC was found to be more effective in both mono- and dual-species biofilm communities. BC was more effective against S. Typhimurium than S. aureus biofilm concerning monoculture conditions. The effectiveness of PAA was highly variated against S. aureus, in mixed-culture conditions with S. Typhimurium. Treatment with NaClO was not effective in eliminating both sessile communities under mono/dual cultures. The dominance of each strain in the sessile communities was monitored by PFGE that interestingly revealed different strain prevalence, regarding biofilm formation ability and antimicrobial resistance. Furthermore, nano-coatings based on organosilanes that enhance hydrophobicity of surfaces were tested against common foodborne bacteria (S. aureus, S. Typhimurium, L. monocytogenes, Y. enterocolitica, E. coli O157:H7) attachment and subsequent biofilm formation on stainless steel and glass surfaces (CHAPTER 7). Organosilane-based products seemed to affect bacterial attachment on the inert surfaces and/or subsequent biofilm formation, but it was highly dependent on the species and the surface material involved. According to our results, organosilanes eliminated the adherence (3 h) and bifilm formation (24 h) of S. Typhimurium both at modified glass and stainless steel surfaces. Significant higher cell population of S. aureus (glass) and E.coli O157:H7 (stainless steel) were attached on surfaces modified with organosilanes compared to controls. Organosilanes had no effect on eliminating L. monocytogenes attached cells nor biofilm formation.Overall, the present Thesis highlights the positive impact on food safety following consumers’ adoption and implementation of safe practices during food preparation and adequate subsequent cleaning/disinfection procedures. Bacterial transfer was also determined as a multi-factor process that was directly depended on many endogenous and exogenous factors and their interactions. Furthermore, an insight into multispecies/multistrains biofilm interactions, as an important factor during cross-contamination phenomena was obtained. Finally, the evaluation of efficacy of important strategies (disinfectants, nano- coatings) against bacterial attachment and biofilm formation was determined.
Degree
thesis:*- Grantor dc:publisher
- Agricultural University of Athens
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Gkana, Eleni
- Γκάνα, Ελένη
Subjects
dc:subject × 22- Βιοϋμένια
- Τροφιμογενή παθογόνα
- Διασταυρούμενη επιμόλυνση
- Απολυμαντικά
- Καταναλωτές
- Νανο-επιστρώσεις
- Biofilms
- Foodborne pathogens
- Cross-contamination
- Disinfectants
- Consumers
- Nano-coatings
- Επιστήμες Μηχανικού και Τεχνολογία
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Γεωπονικές Επιστήμες και Κτηνιατρική
- Κτηνιατρική
- Άλλες Γεωπονικές Επιστήμες
- Engineering and Technology
- Other Engineering and Technologies
- Agricultural and Veterinary Sciences
- Veterinary Science
- Other Agricultural Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/39011