Back to search

University of Patras

Ολική αρθροπλαστική ισχίου με μεταλλικές αρθρούμενες επιφάνειες, συναρμολογούμενους μεταβλητούς αυχένες και μεγάλες κεφαλές: μελέτη της εμβιομηχανικής συμπεριφοράς της και συσχέτιση με την κλινική και ακτινολογική πορεία των ασθενών

Abstract

dc:description

Due to their theoretical advantages, hip systems combining modular necks and largediameter femoral heads have gained gradually popularity. However, among others,concerns regarding changes in the load transfer patterns were raised. Recent stressanalyses have indeed shown that the use of modular necks and big femoral headsalters significantly the strain distribution along the femur. Our original hypothesis wasthat these changes may affect early distal migration of a modular stem. We examinedthe effect of head diameter and neck geometry on migration at two years of follow-upin a case series of 116 patients (125 hips), who have undergone primary Metal-on-Metal THA with the modular grit-blasted Profemur®E (Wright Medical TechnologyInc., Arlington, TN) stem combined with large-diameter heads (≥40mm). We foundthat choice of neck geometry and head diameter has no effect on stem migration. Amultivariate regression analysis including the confounding variables of the body mass index, bone quality, canal fill and stem positioning revealed only a negativecorrelation between subsidence and canal fill in midstem area. Statistical analysisdidn’t confirm our hypothesis that choice of neck geometry and/or head diameteraffects early distal migration of a modular stem. However, the importance of correctstem sizing was revealed.In order to further investigate whether the different strain distributions of the variousneck geometries and head diameters play a role in the increased rate of loosening, wedesigned a Finite Element Analysis (FEA) and used as reference the loading behaviorof the straight-neck system with the 28 mm head. Using data acquired by ComputedTomographies and a Coordinate Measurement Machine, a cadaveric femur and aProfemur-E modular stem were fully digitized, leading to a three dimensional finite element model in ANSYS Workbench. Firstly, strains and stresses were calculated, focusing on areas of clinical interest: the calcar and below the greater trochanter in theproximal femur, the stem tip region and a profile line along linea aspera. Theperformed FE analysis revealed that the use of large heads produces significantchanges in strain development within the bone volume, with respect to the referencemodel featuring a typical femoral head of 28mm. In the lateral side, along linea asperaand for the stem tip area increasing the head diameter, results in strain rise, while inthe calcar area the opposite is observed.Mean strain values, for each of the 11 available neck geometries were then calculated,focusing on specific regions of interest (ROIs) as a whole: medially the calcar andlaterally the area below the greater trochanter, as well as, the anterior and the posteriorsurfaces of the femur and a circumferential area around the stem tip. Compared withthe straight neck system, the 15° anteverted neck system showed an increase of 17% and 17.7% in the mean strain developed at the anterior and posterior ROIsrespectively and seems to be the most precarious. The same neck showed the greateststrain increase also at the lateral ROI (13%) and at the calcar (5%). At the stem tip thegreatest increase was recorded with the double-angled valgus-retroverted neck(15.4%), while for the 15° anteverted neck was 11%.We believe, however, that the reported higher incidence of aseptic loosening ofmodular-neck stems cannot be confirmed only by the findings of this study. Instead,the explanation should be sought also in the bioreactivity of the metal ions generatedby the metal-on-metal junctions and not in the biomechanics of these systems alone.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2014

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Georgiou, Christos
  • Γεωργίου, Χρήστος

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/39159

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Georgiou, Christos; Γεωργίου, Χρήστος. Ολική αρθροπλαστική ισχίου με μεταλλικές αρθρούμενες επιφάνειες, συναρμολογούμενους μεταβλητούς αυχένες και μεγάλες κεφαλές: μελέτη της εμβιομηχανικής συμπεριφοράς της και συσχέτιση με την κλινική και ακτινολογική πορεία των ασθενών. University of Patras, 2014. http://hdl.handle.net/10442/hedi/39159