Back to search

National Technical University of Athens (NTUA)

Παλμική ηλεκτροαπόθεση και χαρακτηρισμός λεπτών φιλμ χαλκοπυριτικού CuInSe2

Abstract

dc:description

The aim of the present thesis is the electrochemical synthesis of chalcopyrite CuInSe2 (CIS) and preparation of the compound in the form of thin polycrystalline films intended for use in solar cell device applications. The experimental work comprises, in particular, an inquiry of the possibility to attain electrolytic formation of binary and ternary compounds in the Cu–In–Se system from acidic aqueous solutions containing Cu(II), In(III), Se(IV) electroactive species, in the presence of citrates (C6H5Na3O7) as complexing agent and KNO3 as supporting electrolyte. Electrodeposition was carried out under constant (DC) or pulsed potential (PP); the influence of process parameters, such as the applied DC potential, pulse potential and related parameters (duty cycle, pulse period), bath composition, pH, deposition time, type of the substrate (Ti, Ni, FTO conductive glass) and bath temperature, were investigated. The deposits were subjected to thermal annealing (typically 350 C in nitrogen atmosphere) and/or chemical etching in cyanide solutions in order to improve their stoichiometry and crystallinity and remove deleterious secondary phases. The electrochemistry of the system and the electrosynthesis/film preparation mechanism were investigated mostly by cyclic voltammetry. The structural and morphological characterization of the deposits were carried out by X-ray powder diffractometry (XRD), typical or high resolution Scanning Electron Microscopy [(FE)SEM], and micro-RAMAN spectroscopy. The elemental composition of samples was assessed by Energy dispersive X-ray local analysis (EDX). Reflection (laser) spectroscopy was used to estimate the film thickness, as well as the electronic band gap width of semiconductive samples.Equilibrium phase diagrams in the Cu–In–Se system are given and commented in the first chapter of the dissertation; the description includes in particular the metallurgical diagrams of the Cu–Se, In–Se, Cu–In binaries, and the pseudo-binary, Cu2Se–In2Se3 cut of the ternary system (comprising definite selenium content, namely fixed valence stoichiometry) proper for the CuInSe2 compound. Further, the structure and properties of chalcopyrite semiconductors, and the significance of CuInSe2 in photovoltaic applications, together with a description of thin film solar cells based on this material, are introduced. The second chapter refers to thin film fabrication techniques, especially those used for the preparation of materials for photovoltaic applications. The third chapter comprises a general discussion on electrochemical preparation aspects, with emphasis in electrolytic deposition under constant or pulse potential, used in this work, as well as on basic electrochemical diagnostic techniques, such as the cyclic voltammetry. A literature review on the electrolytic preparation of CuInSe2 and derivative compound thin films is held in the forth chapter along with a description of electrocrystallization mechanisms. This part is concluded with a brief report on material characterization techniques. The experimental part of this work starts with a description of the procedures followed for bath preparation, electrode surface preparation, and the experimental setup utilized for voltammetry experiments and film formation, as well as the post-treatments applied, namely the thermal treatment/annealing and chemical etching.The cyclic voltammetry results were found to corroborate the basic aspects of the assumed mechanism of CuInSe2 electrosynthesis, as reported in the literature, suggesting that during the cathodic deposition of the compound, CuxSe crystallites are initially formed on the electrode substrate, which enable/assist the underpotential reduction of In(ΙΙΙ) and allow the production of the ternary CuInSe2 chalcopyrite phase. The study of electrochemical deposition from binary Cu(II)+Se(IV) baths showed that the method leads to formation of mixtures containing a series of copper-selenium compounds, in particular CuSe, Cu2Se, Cu2-xSe (Cu1.8Se) and Cu3Se2 in various proportions, depending on the applied conditions. The elemental and phase composition of the as-obtained multi-phase deposits as well as the film crystallinity, crystallographic textures and morphology depended on both the total and relative concentrations of Cu(II) and Se(IV) species in solution, and the applied DC or PP conditions of deposition.Based on the above results, deposition experiments were carried out in the Cu–In–Se system by employing DC constant or pulsed-potential conditions. In the former case, deposition leads to the formation of ill-crystallized, multi-phase mixtures which necessitate thermal treatment to give the desired chalcopyrite phase. On the other hand, the pulse potential technique with appropriate adjustment of the plating conditions enabled growth of the ternary chalcopyrite CuInSe2 already from the deposition stage. By optimizing the plating parameters, films were obtained which were rich in CuInSe2 crystallites having strong CIS(112)tetr. preferred orientation; although containing small quantities of chalcopyrite-variant phases (ordered defect compound; ODC) and binary copper selenides. In general, good stoichiometry and lack of undesirable phases in the deposits was achieved by having an excess of In(III) in solution and using an off-time longer than the on-time (i.e. toff > ton) with short periods (not longer than 1 s), i.e., short cathodic pulses and long relaxation times with slightly anodic or zero value currents. Best results in terms of stoichiometry were obtained with the bath-pH adjusted in the 1.60 to 1.70 range and with concentrations of citrate additive between 25 and 60 mM. Formation of high quality deposits with good adherence to the substrate was achieved at room temperature rather than higher bath temperatures. The thickness of the deposits was found to increase almost linearly with deposition time along with an improvement in the desired stoichiometry and crystallinity, up to about one μm thickness. Photovoltammetry experiments indicated p-type conductivity for the electrodeposited layers in the whole scan range. The band gap widths of stoichiometric/crystalline samples were found to approach the theoretically expected value of ca. 1 eV. Although the application of pulse plating moderated the need of post-treatments, it was shown also that the solid state structure of the pulse plated films make them ideal precursors for annealing treatment.To sum up, it is demonstrated in this work that copper indium diselenide films resembling those synthesized by vacuum methods, and in many cases outmatching in structural quality thermally treated electrodeposited films, can be produced by pulsed potential deposition from an acidic aqueous bath of Cu(II), In(III), Se(IV) in the presence of citrates. It was understood that pulse plating is possibly the key technique for the electrolytic production of high quality single phase films of CuInSe2 and similar/derivative systems.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Koutsikou, Revekka
  • Κούτσικου, Ρεβέκκα

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/39163

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Koutsikou, Revekka; Κούτσικου, Ρεβέκκα. Παλμική ηλεκτροαπόθεση και χαρακτηρισμός λεπτών φιλμ χαλκοπυριτικού CuInSe2. National Technical University of Athens (NTUA), 2016. http://hdl.handle.net/10442/hedi/39163