National Technical University of Athens (NTUA)
Αιωρούμενα σωματίδια από καύση διαφόρων ειδών βιομάζας: κατανομή μεγέθους και ποιοτικοποσοτική σύστασή τους
Abstract
dc:descriptionDemands in global energy are rapidly increasing causing demand for the stock of fossil fuels. Currently, atmospheric CO2 and other greenhouse gases due to the burning of fossil fuels introduces environmental concerns and the need to find other clean and renewable sources of energy such as biomass. Biomass is considered to be a "CO2 neutral" fuel, with economic and environmental benefits. However, biomass and specifically wood pellets are responsible for air pollution that includes levels of particulate matter (PM), carbon monoxide (CO), volatile organic compounds (VOC) such as polycyclic aromatic hydrocarbons (PAHs), elemental carbon (ΕC), organic carbon (ΟC), and emissions of heavy metals and toxic elements that are found adsorbed to particulate matter emissions.The aim of this study was to investigate the impact of biomass combustion with respect to conditions and fuel types on particulate matter emissions (PM10). Eight types of biomass, commercially available the last years in Greece for domestic heating, were investigated such as: “mix pine-beech-oak”, “mix spruce-pine-oak”, “100% spruce”, “100% beech”, “olive pellets”, “pellets from the olive core”, “briquettes” and common “wood oak”.A lab-scale device was developed in order to simulate the combustion process using a tube furnace providing it with different oxygen flows and a filter holder system to collect directly their PM10 emissions. The real combustion tests were carried out in two domestic top-feed, pellet-fired stoves and in an open fireplace as well. Determination of particle size distribution of particles with a scanning electron microscope (SEM) was followed. Measurements were made as to the various forms of carbon (TC, EC, OC, CC) as well as PAHs by gas chromatograph - mass spectrometer (GC-MS). Metals adsorbed on PM10 particles, were determined after appropriate treatment as follows: Fe, Mg, Zn, Al, Ba, Cu, Cd by inductively coupled plasma -optical emission spectrometry (ICP-OES), Cr, Mn, Co, Ni, As, Hg, Pb by inductively coupled plasma - mass spectrometry (ICP-MS) and Ca, Na, K by atomic absorption spectrometry (AAS). Some of them such as arsenic, mercury, cadmium, nickel and lead are highly toxic and thus harmful to human health, even at trace concentrations, due to the long term exposure of population.Average PM10 emissions ranged at higher levels at lab scale combustions with flow oxygen at 20 % in the exhaust gas compared with those with 13 % O2 making clear the essential importance of combustion conditions. The concentrations at pellet stoves of 10 and 8,5 kW were very low in relation to the fireplace where there was the highest. The maximum permitted particle emission limit according to the European Standard EN 303.05 is 150 mg/m3 and pellets that do not meet the necessary quality requirements under incomplete combustions exceed these limits. Regarding the total carbon, the highest concentrations resulted in laboratory conditions with 20% O2 in the exhaust gas, followed by the fireplace and the same trend applies to the total metals. As concerns the concentration of total PAHs, they were found to be higher at 13% O2 than at 20% O2. The PAH concentrations measured from pellet stoves of 10 and 8,5 kW were lower than those in lab-scale combustions, concluding that the combustion conditions play a significant role in the emissions of biomass. The PAHs concentration in the fireplace reached the highest emissions contrary to the other appliances. Wood fuel quality, the amount of fuel and the airflow setting are the main parameters that can influence PM10 emissions. Particles from incomplete combustion conditions are more toxic than particles generated under more complete combustion conditions. Substantial differences in the burnout qualities of traditional and modern technology appliances were detected, which also affected the toxicity of the emissions. Pellet stove appliances presented the lowest PM10 emissions contrary to the old technology appliances such as the fireplace where emissions were the highest. High organic emissions were correlated with low combustion efficiency and high emissions of toxic organic substances, e.g., benzo(a)pyrene or benzo[b]fluoranthene, which can be avoided by high combustion temperature and sufficient oxygen availability in the flame, enhanced by good mixing and sufficiently long residence time in the combustion zone. Olive pellet is a new biofuel made from natural wood raw materials without impurities and respond to the demand for cheap and clean, domestic energy and unlike other types of pellets, has limited odor and low levels of particulate matter (PM10).
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Zosima, Aggeliki
- Ζωσιμά, Αγγελική
Subjects
dc:subject × 12Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/39193