Back to search

University of Patras

Ανάπτυξη καταλυτών φουλερενίου (C60) στηριγμένων σε MCM41 για την φωτοκαταλυτική οξείδωση οργανικών ενώσεων

Abstract

dc:description

Three studies are included in this dissertation. The first and second ones are related to the development of a series of highly active heterogeneous catalytic system of C60 supported on MCM41 for the singlet oxygen mediated oxidation of the alkenes to the corresponding hydroperoxides. The third one is related to the application of the aforementioned catalysts to the decolorization of the Acid Orange G 10 aqueous solutions.In the context of the first study successive incipient wetness impregnation was used for preparing 3, 6, 9 and 12 wt.% C60 onto MCM-41 surface. N2 adsorption-desorption, FT-IR, XRD, HR-TEM, DRS and TGA, have been used to characterize the photocatalysts. It was found that C60 is highly dispersed (especially in the 3 and 6 wt.% C60 catalysts) within the mesopores or on the external surface of MCM-41, as clusters or crystallites/aggregates of very small size and presumably in the form of atomic layers. The mesoporous structure and characteristics (surface area, mesopore size and volume) of MCM-41 remain almost intact upon deposition of C60 on its surface. The photocatalytic activity was assessed in the photocatalytic oxidation of olefins via the singlet oxygen ene reaction by studying the photooxygenation of 2-methyl-2-heptene as a probe reaction. The catalytic tests were carried out at 0–5 ◦C in CH3CN under oxygen atmosphere and using a 300 W xenon lamp as the light source. The heterogeneous photocatalysts obtained were proved to be very active exhibiting higher substrate conversion, TON and TOF values, compared to those of the unsupported (solid) C60 and the corresponding photocatalysts supported on silica or γ-alumina. This was mainly attributed to the better dispersion of C60 on the MCM-41. The conversion achieved over the catalysts increases with the amount of the supported C60 up to a value of 6 wt.% and then it decreases whereas the TON and TOF values decrease monotonically as the amount of the supported C60 increases following the increase in the size of the supported C60 crystallites/aggregates. Shadow effects were not observed under our experimental conditions.In the context of the second study, the one-step wet impregnation method, followed by heating at 180 ºC, was used for dispersing effectively 6, 9 and 12 % wt C60 onto the MCM-41 surface. N2 adsorption-desorption measurements, FT-IR, XRD, DRS and TGA were used to characterize the prepared photocatalysts. The photocatalytic activity of the C60/MCM-41 series was determined by using the photooxygenation of 2-methyl-2-heptene as a probe reaction. The results of the present study were compared with those obtained in our previous studies where the same photocatalysts had been prepared by using the successive wetness impregnation method. It was found that very effective C60/MCM-41 photocatalysts can be synthesized by applying the one-step wet impregnation method. All three photocatalysts exhibited similar activity in terms of substrate conversion, whereas their intrinsic activity which is expressed by the TON or TOF values, decreased with increasing C60 content. The replacement of the successive incipient wetness impregnation by the simpler wet impregnation method provokes an increase in the photocatalytic activity of the samples with C60 content equal to 9 and 12 %wt but it does not affect the photocatalytic activity of the sample with C60 content equal to 6 %wt, which exhibits the maximum intrinsic activity. The influence of the deposition method and the C60 loading on the photocatalytic performance of the C60/MCM-41 catalysts was rationalized on the basis of the different size of the supported C60 crystallites. The study (third) of decolorization of Orange G aqueous solutions over C60/ MCM41 photo sensitizers containing 3, 6, 9 and 12 wt% fullerene in the presence of ascorbic acid showed that decolorization is achieved to some extent in the dark by simple adsorption of the color on the surface of the catalyst sample. The extent of decolorization increases with the irradiation of the sample and due to photocatalytic degradation of the color. This is maximized over the sample with the lowest content of fullerene and attributed to the higher specific adsorption of color due to the highest specific surface area of the sample as well as to the high intrinsic photocatalytic activity of small C60 clusters predominated in this sample.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kyriakopoulos, Ioannis
  • Κυριακόπουλος, Ιωάνννης

Subjects

dc:subject × 31

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/39198

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kyriakopoulos, Ioannis; Κυριακόπουλος, Ιωάνννης. Ανάπτυξη καταλυτών φουλερενίου (C60) στηριγμένων σε MCM41 για την φωτοκαταλυτική οξείδωση οργανικών ενώσεων. University of Patras, 2016. http://hdl.handle.net/10442/hedi/39198