Back to search

National Technical University of Athens (NTUA)

Development of a hybrid compressible vortex particle method and application to external problems including helicopter flows

Abstract

dc:description

A new hybrid CFD methodology is formulated for external aerodynamic problems. The work was motivated by the need to efficiently simulate complex engineering problems that are dominated by strong vortex interactions and involve several independently moving bodies. To this end standard (Eulerian grid-based) CFD is strongly coupled with compressible vortex particle method (Lagrangian grid free). More specifically, The Eulerian CFD Solver}(MaPFlow): A compressible unstructured Finite Volume URANS solver was developed. MaPFlow is equipped with: Low Mach Preconditioning to handle flows in the incompressible regime; the Spalart-Almaras and k-ω SST turbulence modeling; the options of near wall treatment and wall functions; Arbitrary Lagrangian Eulerian formulation for moving of deformable grids; and multi-block domain decomposition. The parallelization of the code follows an MPI implementation.The Lagrangian Solver: A compressible Lagrangian Vortex Particle solver was formulated and developed. The formulation uses mass, dilatation, vorticity, energy and volume as working variables and can handle compressible flows including shocks. To mitigate the computational cost, a multi-block Particle Mesh (PM) technique was implemented using the James-Lackner Algorithm. Coupling of the two solvers in one tool (HoPFlow): The Eulerian and Lagrangian solvers were strongly coupled in a single hybrid methodology. Specific coupling conditions have been formulated that guarantee continuity, consistency and conservation. The results presented in this work basically aim at verifying the codes that were developed. Initially, the CFD solver is validated by comparing its predictions to experimental and numerical data in several two and three dimensional cases. Next, the hybrid solver is validated by comparing its predictions to purely Eulerian results. Validation cases include: two dimensional flows around stationary and moving airfoils in a wide range of Reynolds and Mach Numbers and three dimensional flows around stationary and rotating wings (Wind Turbine and Helicopter Rotors).The extensive validation conducted showed that both the CFD solver (MaPFlow) and the hybrid one (HoPFlow) perform well. It is shown that the hybrid solver operates at significantly lower diffusion rate and because of that gives better results compared to standard CFD when the flow is dominated by strong vortex structures as in the case of a helicopter in hover. Most of the test cases are less complex than that for which standard CFD can provide satisfactory predictions. However, it was necessary to validate the new method against these simpler cases before considering more challenging engineering flows But this was a necessary validation step to take before considering more complicated cases which are left for future research.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2014

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Papadakis, Georgios
  • Παπαδάκης, Γεώργιος

Subjects

dc:subject × 14

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/39271

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Papadakis, Georgios; Παπαδάκης, Γεώργιος. Development of a hybrid compressible vortex particle method and application to external problems including helicopter flows. National Technical University of Athens (NTUA), 2014. http://hdl.handle.net/10442/hedi/39271