Back to search

National Technical University of Athens (NTUA)

Μελέτη διασποράς υδρογόνου και φυσικού αερίου με υπολογιστική ρευστομηχανική

Abstract

dc:description

The general framework of this Doctoral Thesis is the modeling of the physical phenomena involved in hydrogen and natural gas dispersion under cryogenic release conditions. More specifically, simulations of liquefied hydrogen (LH2), liquefied natural gas (LNG) and cryo-compressed hydrogen are performed. The scientific interest in these gases is increasing recently, as they are considered alternative fuels, which will contribute significantly to the reduction of environmental pollution. However, due to their flammable nature, further research is required, in order to comprehend the phenomena that influence their dispersion. Moreover, since these gases are commonly stored under cryogenic conditions, special interest lies in the study of the phenomena that occur at the prevailing extreme low temperatures during an accidental leak from a cryogenic tank. More specifically, in cryogenic dispersion the atmospheric humidity is liquefied or even solidified due to the low temperatures. Through this process heat is liberated (positive buoyancy), but the formed particles increase the mixture density (negative buoyancy). In cryogenic hydrogen releases, the prevailing temperatures are even lower than the saturation temperatures of air components (nitrogen, oxygen) resulting also in air freezing, too. All these phenomena compose a complex dynamic flow system with particles and its simulation with mathematical models is a great challenge.Another phenomenon involved in cryogenic releases is the formation of cryogenic liquid pool on the ground. The released cryogenic fluid might fall on the ground prior to its evaporation forming a cryogenic pool. The pool will absorb heat from its surroundings and especially from the ground and will vaporize. The large temperature difference between the ground and the pool leads to pool boiling. Boiling affects the heat transfer mechanism and thus the vaporization rate of the pool and the gas dispersion. In cryo-compressed hydrogen releases, and in general in compressed releases, there is another phenomenon, which needs special treatment during simulation. At the nozzle the pressure is above atmospheric pressure. Therefore, the fluid expands downwind the nozzle forming an under-expanded jet, which is characterized by a complex structure with shock waves. Moreover, in cryo-compressed releases two-phase flow might occur at the nozzle. The modeling of the two-phase under-expanded jet is another great challenge that should be successfully handled. Therefore, for a realistic representation of the physical problem all the above phenomena should be taken into account. Even though relevant research has been conducted in the past, the modeling of the above phenomena has not been studied thoroughly and the present Doctoral Thesis is an effort to bridge these knowledge gaps. For the Thesis‘s analysis the methodology of Computational Fluid Dynamics (CFD) is employed with the help of the CFD code ADREA-HF. The latter code has been further developed within the framework of the Thesis, in order to meet the novel modeling requirements. New models and methodologies have been developed and incorporated in the code. The models’ evaluation is performed with the help of experiments related to LH2, LNG and cryo-compressed hydrogen release and dispersion. The LH2 experiments were carried out by Health and Safety Laboratory (HSL series) and are related to dispersion in open unobstructed environment above concrete ground. The LNG experiments were performed in Brayton Fire Training Field (BFTF) in cooperation with the Texas A&M University (TEEX series) and involve release and dispersion above water in open confined area. Finally, the cryo-compressed hydrogen experiments were conducted in the closed facility of Karlsruhe Institute of Technology (ΚΙΤ). For the two-phase flow modeling (vapor and non-vapor phase) the dispersed flow approach is employed, which assumes that the non-vapor phase is dispersed in the vapor phase. The Eulerian specification of the flow field is used, in which the different phases (vapor, liquid, solid) are treated mathematically as interpenetrating continua and the concept of volume fraction is introduced. Finally, the mixture model is employed, which regards two-phase flow as a single mixture fluid. Thus, the mixture mass, momentum and energy conservation equations are solved along with the conservation equation of the mass fraction of each component in the mixture. For phase distribution the Rachford-Rice methodology has been incorporated in the CFD code, which calculates the vapor and liquid mass fractions with the help of Raoult’s law. The solid mass fraction of each component appears when the mixture enthalpy is lower than the saturated liquid enthalpy of the component. The mixture physical properties are weighted with the mass fraction of each phase of each component. In the simulated case where humidity effect is studied the conservation equation for water is also solved. For modeling the non-vapor phase (liquid and solid) two models are employed and compared with the experiment: (a) the homogeneous equilibrium model (HEM), which assumed that all phases are in both thermodynamic and hydrodynamic equilibrium (same velocity), and (b) the non-hydrodynamic equilibrium model (HNEM), which assumes that the different phases are in thermodynamic equilibrium, but they can obtain different velocities. In HNEM model the algebraic slip model is used to compute the slip velocity (relative velocity) between the vapor and the non-vapor phases. Furthermore, a novel methodology has been developed, which calculates the slip velocity by solving the momentum conservation equation for the non-vapor phase (non-algebraic model). The new methodology calculates the slip velocity accounting for the non-vapor phase acceleration, while the algebraic slip model assumes that the non-vapor phase reaches its terminal (settling) velocity instantaneously. Similar analysis is performed for the simulated cases that study the air freezing effect. In this case the conservation equations for nitrogen and oxygen are also solved. In the simulated cases of cryo-compressed hydrogen dispersion, to model the under-expanded jet the concept of the notional nozzle is used, which replaces the actual nozzle with a notional nozzle at a location downstream, where the pressure has expanded to atmospheric. Several notional nozzle approaches have been developed for vapor-phase-only releases. Within the present Thesis, a notional nozzle approach has been developed for cryogenic under-expanded jets and the performance of the notional nozzle concept is assessed in such under-expanded jets for the first time. The main conclusions extracted through the Thesis’s analysis are that ambient humidity makes the cloud more buoyant and reduces significantly the associated risks in LH2 dispersion, while its effect is small in LNG dispersion. The phase change of air’s components has similar effect on LH2 dispersion, whilst it has little impact on cryo-compressed hydrogen dispersion due to the high jet momentum. Comparison between the algebraic slip model and the newly developed non-algebraic model shows that the first overestimate greatly the slip velocity for large particles, while the latter seems to be valid regardless the particles’ size. Slip phenomena between phases affects vapor dispersion, especially in cases with high non-vapor mass fraction in an extended area in the domain based on HNEM model. Finally, the effect of pool boiling on the ground heat transfer rate was modeled and studied and it is shown that it plays significant role in spills above water increasing the pool’s evaporation rate. We conclude that the purpose of this Doctoral Thesis, i.e. the study of the physical phenomena related to release and dispersion of liquefied gases and cryo-compressed fluids and the development of a mathematical model that fully simulates them and makes useful predictions has been fulfilled; and that the results obtained are in satisfactory agreement with available experimental data.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Giannissi, Styliani
  • Γιαννίση, Στυλιανή

Subjects

dc:subject × 19

Rights

dc:rights
Statement dc:rights
  • BY
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/39339

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Giannissi, Styliani; Γιαννίση, Στυλιανή. Μελέτη διασποράς υδρογόνου και φυσικού αερίου με υπολογιστική ρευστομηχανική. National Technical University of Athens (NTUA), 2016. http://hdl.handle.net/10442/hedi/39339