National Technical University of Athens (NTUA)
Μέθοδοι διάγνωσης βλαβών μηχανολογικού εξοπλισμού από δυναμικές μετρήσεις σε μεταβαλλόμενες συνθήκες λειτουργίας
Abstract
dc:descriptionThe sector of machines maintenance uses a wide toolkit to maintain the efficiency, durability and performance in order to avoid quality degradation. The use of recent technological developments in data processing and automation systems, apply increasingly modern methods and maintenance practices that minimize the time stops due to failure and increase the availability of equipment. The continuous increase in complexity of the means of production upgraded maintenance techniques into real science. The development of predictive and dynamic equipment performance monitoring methods answer to increasing productivity requirements and risk reduction.This thesis focuses on fault diagnosis using dynamic methods under varying operating conditions. The changing operating conditions relating to the essential parameters of engine operation such as rotational speed, moving vehicle speed, bearings’ slip and the load. A range of devices are considered, from small to large sizes such as rolling bearings, engines and vehicles with different operating principles as reciprocating engines and rotary engines. For diagnostic purposes, recorded vibrations generated by the operation of the machines are analyzed by methods widely used and compared with two proposed methods that are presented and analyzed extensively.Chapter 1 gives a presentation of the basic principles of diagnosis and diagnostic targets. There is a short presentation of classical signal processing methods and the results by the methods used in the following chapters. The two dynamic methods presented and proposed in following chapters, are tested for their performance and adapted to each case. From the application and the comparison with other methods, the use of signal analysis tools result in specific directions for the parameters choice. Chapter 2 is a literature review in the scientific field of the current thesis and the contribution achieved. Chapter 3 is devoted to HARD method (Harmonic Decomposition), with comparisons and applications in a simulated signal. Furthermore, an application in the instantaneous speed of an electric motor shaft was performed. Chapter 4 contains further comparisons and applications in reciprocating gasoline engine. Chapter 5 presents the CSMW method (Complex Shifted Morlet Wavelets) to overcome the difficulties presented by certain overlapping harmonic signals. Also, there are respective applications made for the HARD method. Finally, Chapter 6 presents assessment tools of successful implementation in signals from damaged roller bearings.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Rodopoulos, Konstantinos
- Ροδόπουλος, Κωνσταντίνος
Subjects
dc:subject × 12- Εκτίμηση στιγμιαίας συχνότητας
- Διάγνωση βλαβών
- Πολλαπλή εκτίμηση συχνοτήτων
- Διάγνωση εδράνων κύλισης
- Instantaneous frequency estimation
- Fault diagnosis
- Multiple frequency estimation
- Roller bearing fault diagnosis
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
dc:rights- Statement dc:rights
-
- BY_NC
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/39351