Back to search

University of Patras

A numerical approach for the shape optimization of woven fabric composite structural elements

Abstract

dc:description

In the present thesis a novel numerical approach for the optimization of composite structures fabricated from woven composite materials is developed. The aim is to increase the ultimate strength of the structure while at the same time decreasing its weight. The numerical approach is based on a combination of the numerical algorithm of PDM, along with SO in an iterative subroutine. PDM, which is comprised of three steps, namely stress analysis, failure analysis and material property degradation, is used to predict the initiation and propagation of failure in the structure. During the phase of SO certain geometrical parameters are varied within limits in order to minimize the stresses that lead the structure to ultimate failure as indicated by PDM results. Finally the resulting geometry is solved with PDM to ensure the enhancement in the ultimate strength and the decrease in ultimate weight.Within the frame of this approach, a new methodology for the numerical modeling and the simulation of mechanical behavior of woven composite materials is proposed. The highly inhomogeneous nature of woven composite materials in the micro-scale is taken under consideration to create accurate RVE FE models which represent the actual material. Then PDM is used for the simulation of their mechanical response. The calculated properties, in terms of stiffnesses and strengths, are then inserted as inputs in the global FE model of the composite structure. Additionally, the reliability and applicability of a CDM, in comparison with CZM, are assessed in order to use the CDM for the modeling of the adhesive’s mechanical behavior.The mentioned numerical approach is applied in an H-shaped joining element fabricated from two different woven composite materials for the loading case of tension. In the first case NCF composite is used while in the second case the joint is made of 3D FIW composite. The purpose of the H-shaped element is the joining of two composite plates via the method of adhesive bonding.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2015

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Koumpias, Antonios
  • Κουμπιάς, Αντώνιος

Subjects

dc:subject × 17

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/39374

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Koumpias, Antonios; Κουμπιάς, Αντώνιος. A numerical approach for the shape optimization of woven fabric composite structural elements. University of Patras, 2015. http://hdl.handle.net/10442/hedi/39374