University of Patras
Αριθμητική μεθοδολογία πολλαπλών κλιμάκων ανάλυσης για την παραμετρική εκτίμηση των μηχανικών ιδιοτήτων πολυμερών και σύνθετων υλικών ενισχυμένων με νανοσωλήνες άνθρακα
Abstract
dc:descriptionIn this thesis, a continuum-based multi-scale methodology was developed to predict the mechanical properties of polymers and polymeric matrix composites reinforced with carbon nanotubes (CNTs). To achieve the purpose of the thesis, finite element models were developed from the nanoscale to macroscale and mechanical, microscopy and nanoindentation tests were conducted to obtain input data and verifying the models.Originally, a parametric study was conducted using a representative volume element (RVE) model of a single straight nanotube surrounded by the interphase and the matrix and a RVE model of a single curved nanotube surrounded by the interphase and the matrix. This parametric study aimed at the initial evaluation of the effect of manufacturing and geometrical parameters on the elastic properties of the CNT-reinforced polymer and served as a guide for the development of the forthcoming models. Combining the two RVEs, a parametric FE model of a representative unit cell (RUC) of nanotube agglomerate was developed. For the creation of the complex geometry of the RUC the TexGen software was used.The multi-scale methodology was applied to predict the Young’s modulus and yield strength of polypropylene (PP) reinforced with multi-walled CNTs (MWCNTs), the modulus and compressive strength of HTA/RTM6 composite material reinforced with MWCNT/RTM6 layers and the bending behavior of a structural element made from the M21/T800S composite material reinforced with MWCNT/PA6 layers. For the development of the models of the MWCNT/PP material, data from scanning electron microscopy (SEM) images, atomic microscopy images (AFM) and nanoindentation tests were employed. In the frame of this application, a methodology, which makes use of the image processing of SEM photographs for describing the dispersion of agglomerates, was developed. The methodology combines the image processing program ImageJ with MATLAB. The numerical results were verified against tension tests conducted on MWCNT/PP specimens of 2wt% and 5wt% in the frame of the thesis, and compression tests and 4-point bending tests conducted in the frame of SARISTU project.The results from tensile tests show an increase in Young’s modulus by 20.29% and 25.19% for the 2wt% and 5wt% specimens, respectively, and in yield strength by 26.13% and 33.31%, respectively. For samples with properties below average, SEM photos showed poor dispersion and formation of large nanotube agglomerates. Estimates of mechanical properties of the reinforced polypropylene exhibit satisfactory convergence with the corresponding experimental values. Regarding the yield strength, the estimation of the model for the 2wt% MWCNT/PP material lies at the upper limit of the experimental range. This is attributed to the imperfect modeling of the interphase. Additional analysis performed show a significant influence of the interphase thickness on the predicted yield strength of the MWCNT/PP material. Using a lower value for the interphase thickness, the model manages to accurately predict the yield strength of the MWCNT/PP materialThe simulation results of the CNT-reinforced composites show a decrease in longitudinal compressive modulus, an increase in longitudinal compressive strength and no effect on transverse compressive strength. For the structural element, an enhancement in bending behavior was predicted. In all cases, the numerical predictions correlate very well with results from mechanical tests.The main conclusion of the thesis is that the developed numerical methodology is capable of evaluating the effect of manufacturing and geometrical parameters on the mechanical properties of polymers and polymeric matrix composites reinforced with CNTs and may be used, with minor modifications, for the design and optimization of these materials in order to save development time and cost.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Chanteli, Angeliki
- Χαντέλη, Αγγελική
Subjects
dc:subject × 12Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/39401