National Technical University of Athens (NTUA)
Model predictive control strategies for power electronics converters and AC drives
Abstract
dc:descriptionThis thesis focuses on model predictive control (MPC) strategies for power electronics converters and ac drives.Due to their switching nature, power electronic systems constitute nonlinear systems with multiple inputs andoutputs, and subject to constraints (e.g. the duty cycle should be limited between zero and one). Over the yearsmany control strategies have been proposed that are mainly based on the conventional proportional-integralderivative(PID) controller combined with nonlinear techniques, such as pulse width modulation (PWM). However,PID controllers are ideally suited to linear, single-input, single-output (SISO), unconstrained control problems.Moreover, controllers of this type are usually tuned to achieve satisfactory performance only in a narrow operatingrange. Therefore, the problems associated with many power electronics applications and their closed-loopperformance still poses theoretical and practical challenges.A control algorithm that has recently been gaining popularity in the field of power electronics is MPC. MPC is acontrol strategy that was developed as an alternative strategy to the conventional PID control. Its success is basedon the fact that it uses a mathematical model of the plant, which allows the controller to predict the impact of itscontrol actions. Furthermore, MPC is capable of handling complex and nonlinear dynamics, while several designcriteria (constraints) can be explicitly included in a simple and effective manner. By imposing constraints on thevariables of concern the plant is able to operate at its physical limits without violating them. Thus, the mostfavorable operation can be obtained, while the operational limits of the plant are fully respected. Hence, thanks toall these advantageous features, MPC has attracted the interest and attention of research and academic ΕΚΤ | www.didaktorika.gr | 5communities. Furthermore, the advent of immensely powerful microprocessors with increased computationalcapabilities enabled its application in the field of power electronics with significant success.This thesis is divided into two parts. In the first part the key notions behind MPC are presented, including theconcepts of optimization, optimal control, and receding horizon policy. In addition, a brief introduction to themodeling of hybrid systems as hybrid automata is included. Finally, the notion of enumeration strategy isintroduced.The second part is devoted to applications of MPC in the field of power electronics. It consists of three chapters,each of which refers to a different application. More specifically, Chapter 3 is devoted to dc-dc boost converters,Chapter 4 to cascaded H-bridge (CHB) multilevel rectifiers, and Chapter 5 to ac drives.Chapter 3 presents two MPC approaches for dc-dc boost converters. A discrete-time switched nonlinear (hybrid)model of the converter is derived, which captures both the continuous and the discontinuous conduction mode.The controller synthesis is achieved by formulating an objective function that is to be minimized subject to themodel dynamics. In the first approach, MPC is implemented as a current-mode controller. Two control loops areemployed, with the inner loop being designed in the framework of MPC. Two different objective functions areformulated and investigated. The control objective, i.e. the regulation of the current to its reference, is achieved bydirectly manipulating the switch, thus a modulator is not required. The second proposed strategy, utilized as avoltage-mode controller, achieves regulation of the output voltage to its reference, without requiring a subsequentcurrent control loop. Furthermore, for both approaches, a state estimation scheme is implemented that addressesload uncertainties and model mismatches.In Chapter 4 an MPC strategy is adapted to the CHB multilevel rectifier. The proposed control scheme aims tokeep the sinusoidal input current in phase with the supply voltage, and to achieve independent voltage regulationof the H-bridge cells. To do so, the switches are directly manipulated without the need of a modulator.Furthermore, since all the possible switching combinations are taken into account, the controller exhibits favorableperformance not only under nominal conditions, but also under asymmetrical voltage potentials and unbalancedloads. Finally, a short horizon is employed in order to ensure robustness; in this way the required computationaleffort remains reasonable, making it possible to implement the algorithm in a real-time system.In Chapter 5 an approach to include a variable switching time point into predictive torque control (PTC) isintroduced. In PTC the switching frequency is limited by the sampling frequency; its theoretical maximum value ishalf the sampling frequency. However, in reality the switching frequency is lower than this value and thus highcurrent and torque ripples occur compared to modulator-based control methods. In order to overcome this anoptimization problem is formulated and solved in real-time. Thereby, apart from the regulation of the torque and thestator flux magnitude to their references, an additional control objective should be met: the minimization of thetorque ripple. To do so, the time point at which the switches of the inverter should change state is calculated. Theproposed control scheme, called variable switching point predictive torque control (VSP2TC), is employed tocontrol both a two-level inverter driving an induction machine (IM), as well as a three-level neutral point clamped(NPC) voltage source inverter driving an IM.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2013
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Karamanakos, Petros
- Καραμανάκος, Πέτρος
Subjects
dc:subject × 22- Ηλεκτρονικά ισχύος
- Συστήματα οδήγησης μηχανών εναλλασσόμενου ρεύματος
- Βέλτιστος έλεγχος
- Προβλεπτικός έλεγχος
- Υβριδικά συστήματα
- Μετατροπείς πολλαπλών επιπέδων
- Μετατροπείς συνεχούς τάσης σε συνεχή
- Ανορθωτές με αλληλένδετες βαθμίδες
- Αντιστροφείς με διόδους περιορισμού
- Power electronics
- AC drives
- Optimal control
- Model predictive control
- Hybrid systems
- Multilevel converters
- DCDC converterς
- H-bridge rectifiers
- Neutral point clamped inverters
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/39404