University of Western Macedonia
Καταλυτική πυρόλυση βιομάζας για την παραγωγή εναλλακτικών βιο-καυσίμων και χρήσιμων χημικών προϊόντων
Abstract
dc:descriptionThe continued increase in world energy demand, the concern over the protection of the environment and the limited reserves of fossil fuels have turned research efforts towards the investigation of alternative, environmentally-friendly and renewable energy sources. Lignocellulosic biomass in particular is an abundant, low-cost and widely available renewable energy source that does not compete with food production. Lignocellulosic biomass can be converted directly to liquid, gas and solid biofuels through the fast pyrolysis process. The primary product of fast pyrolysis is the liquid, which is known as bio-oil and presents many advantages as an energy carrier compared to solid biomass, such as higher energy density, lower transportation and storage costs and easier handling. However, bio-oil also has several adverse properties due to its high content in oxygenates, which are products of the thermal decomposition of biomass and render it unsuitable as a fuel, making its introduction in the world energy balance difficult. Some of these adverse properties are its high water content, its immiscibility with conventional hydrocarbon fuels, its high content in heavy compounds and more importantly, its instability under storage and transportation conditions. For the production of a higher quality bio-oil with improved properties, it is necessary to remove a significant part of the oxygen that originates from the biomass and convert the undesirable oxygenates into more desirable products. The above goal can be achieved with the catalytic pyrolysis of biomass, in which biomass is decomposed in the presence of a solid catalyst. The pyrolysis vapours that are formed during the thermal decomposition of biomass come in contact with the catalyst particles and the catalytic reactions that take place remove oxygen and form compounds that impart the bio-oil with improved properties for its use as a fuel. Among the disadvantages of the catalytic pyrolysis of biomass are the reduced yields of organic bio-oil, the formation of undesirable solid products (catalytic coke) and the limited life-time of the catalyst, which has to be replenished frequently. As such, the major challenge in the development of the process is the design of suitable catalysts that are effective at removing oxygen from the pyrolysis vapors, exhibit good selectivity towards the formation of desirable compounds, minimize the formation of undesirable byproducts and are stable, with long life spans. The achievement of the above goal is not simple because biomass is a complex feedstock and its composition in the various biopolymers (cellulose, hemicellulose and lignin) and inorganic components varies greatly depending on its type and origin. The thermal decomposition of these biopolymers results in the formation of hundreds of compounds, which react differently with the catalyst. The design of catalysts that can handle such a complex mixture of reactants is a complicated problem, while the exact mechanisms of the thermal decomposition of biomass and the catalytic conversion of its products remain unknown and are the subject of many studies in the literature.In this thesis, an experimental methodology was developed for the evaluation of candidate catalysts for the catalytic pyrolysis of biomass in a bench-scale pyrolysis unit with a fixed bed catalytic reactor. Using the developed methodology, a range of commercially available catalysts were evaluated. Based on the results of this evaluation, new catalytic materials were synthesized in the lab as candidate catalysts. The new materials were extensively characterized and their performance in the catalytic pyrolysis of biomass was evaluated using the developed experimental methodology. Thermal and catalytic pyrolysis of the separate biopolymers of lignocellulosic biomass (cellulose, hemicellulose and lignin) was also carried out in the same pyrolysis unit. The experiments were carried out in an effort to simplify the pyrolysis feedstock and gain an understanding of the reaction pathways that take place during the thermal decomposition and catalytic conversion of biomass. In addition, thermal and catalytic pyrolysis experiments were carried out using representantive pure model compouds of the compounds in the pyrolysis vapors from biomass and possible thermal decomposition and catalytic reaction mechanisms were proposed. Finally, a semi-pilot scale pyrolysis unit with a fluidized bed catalytic reactor was utilized to investigate the hydrothermal deactivation and poisoning of the catalyst from its exposure to high temperature steam and to the inorganic components (alkali and alkaline earth metals) that are contained in the biomass. An appropriate experimental procedure was developed and several hydrothermally deactivated catalyst samples were prepared, as well as poisoned catalyst samples that were exposed to multiple reaction-regeneration cycles in the reactor. The samples were extensively characterized in order to investigate the effect of hydrothermal deactivation and metal poisoning on the catalytic properties. In addition, biomass catalytic pyrolysis experiments were carried out with the deactivated catalyst samples in order to evaluate the effect of hydrothermal deactivation and metal poisoning on catalyst performance.
Degree
thesis:*- Grantor dc:publisher
- University of Western Macedonia
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Stefanidis, Stylianos
- Στεφανίδης, Στυλιανός
Subjects
dc:subject × 22- Βιομάζα
- Πυρόλυση
- Καταλυτική πυρόλυση
- Βιοέλαιο
- Απενεργοποίηση καταλυτών
- Μηχανιστική μελέτη
- Ετερογενής κατάλυση
- Βιοκαύσιμα
- Αξιολόγηση καταλυτών
- Biomass
- Pyrolysis
- Catalytic pyrolysis
- Bio-oil
- Catalyst deactivation
- Mechanistic study
- Heterogeneous catalysis
- Biofuels
- Catalyst testing
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/39452