Back to search

National Technical University of Athens (NTUA)

Κυκλώματα και λογισμικό για μετατροπείς ΣΡ/ΣΡ με ημιαγωγούς καρβιδίου του πυριτίου για χρήση σε φωτοβολταϊκά συστήματα

Abstract

dc:description

In this work, a thorough investigation on the parallel connection of the vertical trench (VT) silicon carbide (SiC) junction field effect transistors (JFETs) during forward and reverse conduction is performed. Both enhancement mode SiC JFETs, which conduct when there is no signal at the gate (Normally-On) as well as depletion mode SiC JFETs, which turn off when gate drive signal is removed, will be studied.An equivalent electrical circuit of JFET, based on their structure, is given. Besides, a second equivalent circuit based on mathematical relations is presented and the elements of the model of Sic JFET for SPICE are identified. The SiC JFETs are compared with other SiC and Si semiconductor switches. The results demonstrate the improved characteristics of SiC semiconductor during both permanent and transient mode. In addition, JFET current monitoring circuits of rapidly varying SiC JFET currents are presented in detail and a measuring circuit, based on current transformers (CTs), is designed. That circuit is able to measure directly both conduction currents and their differences of JFETs connected in parallel. For the operation of the parallel connection, a parametric analysis of the operating characteristics of SiC JFET in permanent and transient operation and of the influence of the parasitic elements of the printed circuit board (PCB) is carried out. The effectiveness of the parallel connection, in respect of the distribution of the currents and the reliability of operation, both during forward and reverse conduction mode, is considered. Various methods are proposed to achieve the forced current balancing. During forward conduction, this is achieved by using a controlled time delay on the gate signals of JFETs through a low cost digital signal controller (DSC). During reverse conduction, the imbalance of currents is addressed by applying different bias voltages on the JFET gates, or by adding an antiparallel diode. The functionality of parallel connected JFETs is verified through simulation and through experimental results both at room temperature and at 150 ° C. Additionally, a boost converter was designed for use in photovoltaic systems. The implementation was done by using Normally-on or Normally-off SiC JFET and the experimental measurements verified that its efficiency is extremely high, of the order of 99%. A new method of tracking of the maximum power point (MPPT) of photovoltaic modules, designed to operate efficiently in very noisy environments, to approach the maximum power point very rapidly and to function without unwanted oscillations, was investigated. The step-up converter was integrated with a three-phase inverter into a single device showing excellent functionality and reliability while carrying out experimental measurements.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kokosis, Sotirios
  • Κοκόσης, Σωτήριος

Subjects

dc:subject × 22

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/39502

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kokosis, Sotirios; Κοκόσης, Σωτήριος. Κυκλώματα και λογισμικό για μετατροπείς ΣΡ/ΣΡ με ημιαγωγούς καρβιδίου του πυριτίου για χρήση σε φωτοβολταϊκά συστήματα. National Technical University of Athens (NTUA), 2016. http://hdl.handle.net/10442/hedi/39502