Back to search

University of Ioannina

Nanostructured high magnetic anisotopy Pt-TM (TM=Co, Fe, Cr) films

Abstract

dc:description

The 3d transition metal alloys are today prospective materials for high density magnetic recording. These include the chemically ordered FePt, CoPt, CrPt3 alloys and the Co/Pt superlattices. The main goal of this work is to provide a comprehensive morphological, structural and magnetic characterization of nanostructured films. The work focuses on four different areas that deal with the optimization of these materials by control of their magnetic anisotropy and microstructural characteristics.Firstly, the effect of layering and thickness studied in CrPt3 and CoPt films: In films obtained by heat-treatment of bilayers and trilayers (of different Co/Pt content) higher degree of chemical ordering and coercivity can be achieved compared to single layer films. The TEM analysis of Co-Pt films reveals that the twin density in trilayers is larger compared to single layers. The average size of grains in CoPt single layers are 32nm, while the average size of Co/CoPt/Pt trilayers is 42nm.Secondly, the study of the effect of layering and magnetic annealing on the texture of Co/Pt multilayers shows that the (001) texture sets in as a result of transformation strain driven selective grain growth of (001) at expense of the other possible textures. This correlation between strain and texture is clear only for magnetically annealed samples. This shows that the main function of the applied field is to correlate local strains in a macroscopic level thus increasing their effect along with directly driving the formation of easy axis (001) towards its direction. Thirdly, the study of switching behavior of regular magnetic FePt nanoislands obtained by sputter deposition of the magnetic layer on monolayers of polystyrene nanospheres (of 970nm and 173nm diameter) used as masks. The nanoislands are magnetically hard and are characterized by non-zero dM-plots. These findings were compared with micromagnetic modeling studies which shows that for anisotropy values high enough to match the observed coercivity, multidomain islands can result in due to the existence of either a softer part or different anisotropy direction part within each magnetic entity. Finally, the previous approach is extended to the study of magnetization reversal in graded anisotropy Co/Pt multilayers which are deposited both onto nanospheres and Si substrates for comparison. The study was based on First Order Reversal Curve diagrams (FORC). Using regular nanostructures the following complication that the study of grade anisotropy films presents, can be dealt with if the thickness exceeds a certain limit above which the formation of stripe domains becomes favorable the straight forward interpretation of the effect of the anisotropy profile on the reversal is not possible. It is found that multilayers can be used to create model graded perpendicular anisotropy systems only when lateral domain propagation is suppressed by appropriate nanostructuration.

Degree

thesis:*
Grantor dc:publisher
University of Ioannina
Year dc:date
2014

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Markou, Anastasios
  • Μάρκου, Αναστάσιος

Subjects

dc:subject × 23

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/39605

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Markou, Anastasios; Μάρκου, Αναστάσιος. Nanostructured high magnetic anisotopy Pt-TM (TM=Co, Fe, Cr) films. University of Ioannina, 2014. http://hdl.handle.net/10442/hedi/39605