National Technical University of Athens (NTUA)
Ευαισθητοποιημένες ηλιακές κυψελίδες με βάση οξειδοαναγωγικούς ηλεκτρολύτες ιοντικών υγρών
Abstract
dc:descriptionDye Sensitized Solar Cells (DSCs) are a new type of 3rd generation solar cells, consisting of : a sensitizer (usually a metal complex or an organic dye) which absorbs light, a semiconductor in the form of thin film which has the role of charge separation, and a redox electrolyte which brings the sensitizer back to its ground state. The circuit closes with a counter electrode (CE), where the redox electrolyte regenerated. The electrolyte component of a DSC contains the redox couple that reduces the oxidized form of the dye, dissolved in an appropriate media, liquid or solid, and additives to improve its performance. The most common redox couple is iodide/triiodide (I-/I3-). The electrolyte reduces the oxidized dye and is, in turn reduced at the counter electrode.Even though the highest efficiencies obtained so far (~13 %) have been reported for electrolytes that contain organic solvents, the multiple problems that they cause in the operation of the cell in the long term (leakage, evaporation, corrosion etc.) impose the turn towards new systems, the most promising of which are ionic liquids (ILs) as solvents. The ionic liquids which are fluid at room temperature (known as Room Temperature Ionic Liquids –RTILs) and comprise of 1,3-dialkylimidazolium cations are of great interest, owing to their capability of ionic and molecular species solvation and their miscibility with organic solvents and most of other ionic liquids. The conversion efficiency of DSCs that incorporate such electrolytes, however, still remain very low compared to the corresponding olganic solvent based ones. The increased viscosity of RTILs is a major problem for the development of photovoltaic devices that will employ these highly promising, green solvents.In order to overcome the problems and restrictions of the ion diffusion, caused by the viscous nature of ILs, an interesting approach towards the solution of high viscosity and low conductivity are binary ionic liquid electrolytes, which are a result of mixing 1-methyl-3-propylimidazoliumiodide (PMII), the IL from the group of alkyl-methyl imidazolium iodides with the lowest viscosity and highest conductivity, with a low viscosity and high conductivity IL from another, non-iodide containing group, such as thiocyanate (SCN), dicyanamide (DCA), tricyanomethanide (TCM) and tetracyanoborate (TCM). Using these binary IL systems, the resulting electrolytes are characterized by high conductivity and favorable charge transfer properties, leading to DSCs oh high efficiency.The detailed study of the effect of anions and cations of ILs on the physicochemical properties of the resulting electrolytes, and the electrical parameters of the corresponding solar cells, has brought forth the importance of the appropriate combination of ILs in binary ionic liquid electrolytes. The carbon chain length of both the iodide and non-iodide ILs that are used in the electrolytes plays an important role in the properties of the corresponding electrolytes, as it determines the viscosity and density, the two features that greatly affect the charge transfer properties and the compatibility with the cathode. Increasing the carbon chain length entails an increase of the viscosity and decrease of the diffusion coefficient, resulting in DSCs with reduced power conversion efficiency. Through the fine tuning of IL combination DSCs with enhanced performance can be obtained.A lot of effort has been invested in order to surpass the multiple drawbacks that the solvents used in the liquid redox electrolytes encounter, with volatility, leakage and toxicity being the most prominent, since they eliminate the reliability of cells’ stability and question their potential large scale applicability. Solidification of electrolytes, however, does not render a complete solution to the problems caused by organic solvents. Evaporation, as well as toxicity issues still remain and limit DSCs long term operation. Low viscosity ionic liquids (ILs) were revealed as an ideal alternative to overcome the main drawbacks of organic solvent-based electrolytes. In order to surpass their liquid state, which is the main issue under investigation, what would constitute an ideal solution would be the solidification of IL-based electrolytes. By solidifiying the novel double salt IL based electrolytes and utilizing their unique properties, such as low viscosity, high diffusion coefficient values, high conductivity and low series and charge transfer resistance values, combined with the beneficial properties of the solidification means, mainly biopolymers eg agarose, DSCs of high efficiency and notable stability can be obtained.The real boost in DSC efficiency came up with the use of Co2+/3+ redox shuttles in 2010 when very large photopotentials of the order of 0.9 V were obtained. A while later, in 2012, a power conversion efficiency of 11.9 % was thereby attained, which increased up to 12.3 % when a second pure organic dye (Y123) was employed to co-sensitize the TiO2 photoelectrode. These reports open now novel horizons towards further optimization of the solar cell performance, especially by modifying the optoelectronic properties of the organic dyes to reduce the effective optical gap, fine tuning of the cobalt complexes structure to control their redox potential, using alternative solvents to better dissolve the redox couple and control diffusivity, and preparing quasi-solid systems to improve cell stability and lifetime etc. In this direction for the first time in literature, novel (iodine-free) electrolytes employing amorphous silica nanoparticles to solidify the standard [Co(bpy)3]2+/3+ couple have been fabricated, an approach that has been proven to be very effective in solidifying electrolytes containing the I-/I3- redox shuttle.This new electrolyte was characterized in detail and then was incorporated in a sandwich-type solar cell configuration, which demonstrated satisfactory efficiency values.Graphene-derived materials have good optical, electrical, and electrocatalytic properties, which make them suitable for applications in electronics (supercapacitors, biomedical sensors), optics, (field emitters, photoelectrochemical devices) and energy-harvesting devices, including their incorporation with great success in solar cells. There are essential parameters which are related to the performance of a DSC and which are directly correlated to the proper function of the CE. Among them, the appropriate selection of the electrolyte and consequently the sensitizer are some of major relevance. Although electrolytes containing iodide/triiodide (I-/I3-) are the most widespread, this redox couple has low redox potential (ca. 0.35 V vs. SHE), which limits the accessible open-circuit voltage (VOC) of the DSC. In addition, the triiodide itself absorbs light, which hinders the optimum absorbance and, thus affecting the sensitizing ability of the dye. In order to overcome the above disadvantages of I-/I3-redox couple, various systems with more positive redox potentials were inquired, with most prominent the Co(bpy)33+/Co(bpy)32+ (bpy is 2,2′-bipyridine) redox couple (0.56 V vs. SHE), which results in DSCs with favorable Voc higher than 0.9 V. By preparing r-GO from GO using the environmental friendly reducing agent, vitamin C and by depositing the material via the spin-coating technique on transparent conducting FTO glass substrates novel electrodes can be prepared, suitable to be used as CE in liquid state DSCs. The novel electrodes have emerged as a very promising alternative to Pt, since the DSCs incorporating them present higher values of Voc and Jsc, which lead to higher power conversion efficiency values. Moreover the combination of the prepared environmental carbonaceous materials with the very promising cobalt complexes based-electrolyte and their use in DSCs, results in increased power conversion efficiency outperforming the corresponding cells using the Pt reference counter electrodes.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Bidikoudi, Maria
- Μπιδικούδη, Μαρία
Subjects
dc:subject × 18- Ενέργεια
- Ευαισθητοποιημένες ηλιακές κυψελίδες
- Στερεοποιημένος ηλεκτρολύτης
- Ηλεκτροχημική φασματοσκοπία εμπέδησης
- Ιοντικά υγρά
- Energy
- Dye sensitized solar cells
- Redox electrolytes
- Electrochemical impedance spectroscopy
- Ionic liquids
- Νανοτεχνολογία
- Επιστήμες Μηχανικού και Τεχνολογία
- Νανοεπιστήμη και Νανοτεχνολογία
- Νανοϋλικά
- Nano-Technology
- Engineering and Technology
- Nanoscience and Nanotechnology
- Nano-materials
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/39656