University of Thessaly (UTH)
Διερεύνηση μηχανικών ιδιοτήτων υλικών που παρουσιάζουν ευαισθησία στην υδροστατική πίεση με τη βοήθεια πειραμάτων διείσδυσης
Abstract
dc:descriptionThe subject of the present doctoral is the assessment of mechanical properties of pressure sensitive materials through instrumented indentation. It consists of two parts Part A, theory, which includes the description of the most important yield criteria, and the analysis of the Knoop indentation. On Chapter 3, a two dimension model based on the R.T.Shield theory is described, where an indenter with 2β angle, is applied on cohesive materials under plain strain. Chapter 4 describes the plastic flow of rock materials under the influence of a rigid frictionless punch. Chapter 5 presents the model of a cone indenter [D.M.Wood, 1984] on cohesive materials. Chapter 6 includes both the analysis of Knoop indentation and the assessment of the ratio (H/E) hardness to modulus of elasticity through instrumeneted indentation. Part B, the experimental part of the thesis, describes the classic instrumented tests such as uniaxial compression test, indirect tensile test, the process of the indentation tests and the description of both materials, natural and artificial. The Chapter 7 describes the process of cement preparation and production, classic instrumented tests such as uniaxial compression test, indirect tensile test (Brazilian test) and the microhardness test, in order to define mechanical properties of the materials. Materials with a wide range of modulus of elasticity and angle of internal friction values were tested through Knoop indentation in order to determine the mechanic properties and to prove the validity of the process. The natural stones that have been tested areTuffeau de Maastricht Chalk, Pietra di Lecce Limestone, Pietra di Vicenza Limestone, Sander Sandstone, Grunnes Soapstone, Portland Island Limestone, Gioia Marble, Lorano Marble, Dionysos Marble and Serena Sandstone.The loads applied varied between 25gr, 100gr, 200gr and 500gr. It was that heavy loads create subsurface fragmentation phenomena. On the other hand very small loads create inappropriate imprints to be measured, contributing to errors. As far as the Knoop hardness medium value is concerned, it was counted 264MPa for cement paste, while on bibliography it is referred between 200ΜPa and 300 MPa. It is noted that the measurement of the small diagonal is necessary for the determination of the modulus of elasticity. The determination of modulus of elasticity strongly relies on the ypothesis of the α constant used in the process. Comparing the resultsfor the modulus of elasticity using the α parameter values of 0.34, 0.45 and 1.5 we proved that only α=0.45 makes the results close to real values. Finally the utility of the proposed processes relies on the fact that we can simplify complex, time-consuming and costly experiments of evaluating the mechanical properties (classic compression and tension tests)with new simplified indentation tests that do not remain in quality or miscount the properties of the materials.
Degree
thesis:*- Grantor dc:publisher
- University of Thessaly (UTH)
- Year dc:date
- 2014
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Athanasiou, Vasileios
- Αθανασίου, Βασίλειος
Subjects
dc:subject × 6Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/39818