Back to search

University of Patras

Προσδιορισμός της βέλτιστης θέσης πρόσδεσης και σχεδιασμός κίνησης αυτονόμου υποβρύχιου οχήματος φέροντος ρομποτικό βραχίονα (IAUV) για την εκτέλεση υποθαλάσσιων χειρισμών

Abstract

dc:description

Current developments on the hydrocarbon industry push the limits of new installations to even greater depths. New fields are being discovered, whereas new hydrate exploitation techniques will start to develop in the near future. As a result, a constant increase on the number of the underwater installations that require constant monitoring and maintenance is observed. This leads to an increasing interest on further development of methods and techniques for unmanned underwater vehicles (UUV). The majority of today’s UUV that are being used to conduct underwater operations are remotely tele-operated vehicles (ROV) that require a support vessel and experienced pilot during an operation. Towards the minimization of the overall cost of the mission, a trend has been developed studying autonomous ROV operation leaving the pilot a supervisory role. Furthermore the development of intervention autonomous underwater vehicles (IAUV) depends on the development of new methods and techniques for autonomous underwater operations. This doctoral thesis aims on the development of methods to assist optimal execution of underwater operations and develop efficient motion planning algorithms for an IAUV during an intervention. After an introductory section describing the applications and the operations currently performed, there follows an analysis of a typical mission and an initial discretization of the motion planning close to the intervention area. Focusing on the case where the IAUV lays close to the intervention area there could be identified three intervention scenarios. The first one regards operations to installations with existing docking features developed to assist ROV docking. The second scenario deals with the case where there exist no pre-installed docking features close to the intervention area and the vehicle would have to autonomously dock in order to execute the requested operations in the optimum manner. Finally, the thirds scenario regards the cases where docking near the intervention is not possible or the nature of the task does not require the vehicle to dock. For this case the IAUV should come up with a motion plan that would allow it to complete the given tasks with a free floating base. Following a review of the related work on existing autonomous docking systems, a study to modify standardized docking panels developed for teleoperated vehicles to AUV friendly docking panels is presented. The modifications regard the introduction of a mechanical guidance system for the final docking stage of the IAUV and the integration on the panel of an active optical and a passive acoustic system that would assist on the identification of the docking panel by the vehicle. Regarding the case where preinstalled docking features are absent, a method for the determination of the optimum docking position is proposed given the current vehicle pose and the position of the task that would allow the IAUV to perform the given operations on the best possible manner. The dexterity of the manipulator is taken under consideration whereas the cases of single and multiple task points are being examined. For the case of multiple task points a control area is considered (defined by a set of control points) and a modified dexterity index is introduced. The calculation of the index is performed analytically for a relatively small number of control points. A neural network is being developed to decrease the computational time required to approximate the index while the number of control points increases. Identifying the advantages of the use of neural networks on function approximation, two types of neural networks are developed to approximate two well-known dexterity indexes, considering the whole IAUV system. With the use of neural networks the computational process is accelerated in great extent and the value of the dexterity index could be used in real time motion planning algorithms with strict requirements regarding the computational cost. The dexterity indexes are correlated with common underwater tasks performed by ROV and provide a measure of dexterity regarding a single configuration, on the calculation of a motion plan.Finally for the third operation scenario, there presented two motion planning algorithms, a global and a local one, for the execution of underwater interventions by IAUV with a free floating base. The calculation of both motion planning algorithms is based on the use of evolutionary algorithms. The Bump-surface notion is used for the mapping of the workspace and the collision avoidance, whereas additional optimization criteria are introduced to achieve an efficient motion plan for the IAUV. The local motion planning algorithm could implement the motion plan derived by the global motion planning algorithm or to determine a new motion plan based on the latest environment information.The thesis is concluded with the discussion of the results achieved by the proposed methods and proposals for future work based on our observations.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2014

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Sotiropoulos, Panagiotis
  • Σωτηρόπουλος, Παναγιώτης

Subjects

dc:subject × 22

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/39944

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Sotiropoulos, Panagiotis; Σωτηρόπουλος, Παναγιώτης. Προσδιορισμός της βέλτιστης θέσης πρόσδεσης και σχεδιασμός κίνησης αυτονόμου υποβρύχιου οχήματος φέροντος ρομποτικό βραχίονα (IAUV) για την εκτέλεση υποθαλάσσιων χειρισμών. University of Patras, 2014. http://hdl.handle.net/10442/hedi/39944