Aristotle University Of Thessaloniki (AUTH)
Παρασκευή, χαρακτηρισμός και εφαρμογές μικτών υδροξυ-οξειδίων Fe-Mn στην απομάκρυνση αρσενικού από το νερό
Abstract
dc:descriptionIn this PhD thesis single-phase nanocrystalline Fe-Mn oxy-hydroxides are synthesized (Fe-MnOOH), capable of removing effectively both As(V) and As(III) from water. Most arsenic removal methods present significantly reduced efficiency in the removal of As(III) which is more toxic compared to As(V), due to its uncharged form in standard pH values of natural water. The synthesis of the adsorbent materials was carried out in a laboratory two-stage continuous flow reactor in room temperature, by providing its implementation in a low cost full scale. The Fe-Mn oxy-hydroxides were synthesized via oxidation and co-precipitation of a ferrous salt (FeSO4∙H2O) by potassium permanganate (KMnO4). The main phase prevailing is tetravalent manganese feroxyhyte, in which Mn4+ atoms are homogeneously distributed into the feroxyhyte structure. Fe-Mn oxy-hydroxides are able for efficient and rapid As(III) oxidation and for its chemisorption afterwards as As(V). For the synthesis of the adsorbents with the optimal properties in both arsenic species removal, the effect of various parameters was examined, such as synthesis pH, redox potential and manganese percentage. Synthesis in low pH values (4 to 5) leads to the formation of high positive surface charge, resulting in an increased efficiency in the removal of As(V) oxy-anions. Furthermore, their production at high redox values according to the pH value, based on the phase diagram of manganese, leads to oxidation state of manganese in the desired value 4. Tetravalent manganese after the oxidation of As(III) is reduced to trivalent which remains in the feroxyhyte structure, without being leached into the treated water. Since the presence of manganese leads to As(III) oxidation, the increase of its content from 0 to 11.7 % wt results in significant higher As(III) removal efficiency. The evaluation of the effectiveness of the qualified adsorbents in conditions close to those encountered in a full-scale system by using adsorption columns, showed their superiority in the removal of both arsenic species, in comparison to the two most commercially used oxy-hydroxides. Finally, this PhD thesis deals also with an innovative and integrated process for the regeneration of saturated oxy-hydroxide adsorbents. The process is based on the advantage of high As(V) adsorption capacity of magnesium oxide (MgO) at adsorption pH values 10 to 12, combined with the alkaline leaching of adsorbed arsenic from saturated column. The final proposed process includes the on-site regeneration of a saturated oxy-hydroxide column by a continuous recirculation configuration, with a NaOH solution flowing sequentially through the saturated adsorbent (leaching step) and the MgO (adsorption step) column. Arsenic is removed from the NaOH solution, which in turn is completely detoxified and recycled to the next regeneration cycle. Experimental results of the regeneration process indicated that the regenerated oxy-hydroxide recovered around 80 % of its removal capacity upon reuse, which leads to a corresponding reduction of the operation cost. Moreover, it was found that the solid wastes of regeneration process, namely spent MgO, can be environmentally disposed as stable additives in commercially cement products.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2014
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Tresintsi, Sofia
- Τρεσίντση, Σοφία
Subjects
dc:subject × 16Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/39949