Back to search

National Technical University of Athens (NTUA)

Ανάπτυξη και μελέτη ιδιοτήτων προηγμένων νανοδομών και επικαλύψεων με έμφαση στις νανομηχανικές ιδιότητες

Abstract

dc:description

This doctoral thesis addresses nanostructures and advanced coatings with emphasis onnanomechanical properties through nanoindentation, in order:1) for the hardness and the mechanical properties of materials to be calculated moreaccurately, (such as thin films, where the exact knowledge of imprint area and calculation isdifficult due to size)2) to evaluate properties such as deformation, creep, time dependent properties,deformation mechanisms, dispersion, adhesion, structureThe aim was the proper design of experiments and protocols that this technique cancontribute significantly (if not to rule) decisions on the functionality and reliability ofmaterials in applications for which they are intended (using the term "technological/engineering properties").The result is reflected in load-unload curves of the material being tested, and propertiessuch as modulus and toughness are extracted.Over the last two decades, the development of technology and recording load shifts duringindentation with high accuracy led to the use of experiments at the nanoscale. Specifically,nowadays this is achived using nN and load displacement detection pin - penetrating with aresolution of ~ 0.04 nm, making the nanoindentation a dominant method of determining thenanomechanical properties of substances, such as thin films, coatings and devices with athickness of several tens of nm. Using nanoindentation, it is possible to assess thedetermination of the hardness, the modulus and the elastic / plastic response of materials.Also using tangential force, scratch tests are performed so as to determine tribologicalproperties.In literature, while nanomechanical properties arewidely reported in a variety of materials,these are not directly related to the application field, leaving a knowledge gap whether thesematerials are finally suitable or not. Furthermore, the calculation of modulus and / orhardness locally (as as many applications require) makes the use of conventional methods(e.g. tension, microhardness) rather inapplicable.By use of this technique, coupled with the techniques of Scanning Probe Microscopy (SPM),Scanning Electron Microscopy (SEM), Thermal Chemical Vapor Deposition (T-CVD), X-RayDiffractometer (XRD), Differential Scanning Calorimetry (DSC), Fourier TransformedInfraRed Spectroscopy (FTIR), Metallographic analysis - optical microscope engineeringmaterials are technologically characterized. Polymers and polymer nanocomposites (PDMS,PDMS with montmorillonite nanoparticles, epoxy matrix with carbon nanotubes), multilayerthin film structures (Teflon, FC), thin films of metals and their oxides (Co, Co3O4) andceramic (zeolite) for bioapplications, anticorrosion, microelectronics, sensors and molecularsieves, respectively.Specifically, nanoindentation measurements of the polymeric nanocomposites revealed thedeformation mechanisms during testing, also giving information about the dispersion ofnanoparticles and the maximum concentration (percolation threshold) beyond which the mechanical integrity of the material deteriorates. It turned out that nanoindentation can benot only a reliable mechanical properties valuation tool, but also a useful mean ofquantifying phenomena such as viscoelasticity, adhesion of the tip in the sample, nanotubematrixinterface and timedependent behavior. Especially for anti-corrosive coatings, thecritical concentration is determined, above which the mechanical integrity of the materialdeteriorates, making it unsuitable for final application. For thin films of cobalt and cobaltoxide, the technique gave the necessary guidelines for the reliability of the materials.Specifically, the cobalt oxide was proved to be suitable, with increased mechanical andtribological properties (wear resistance). Regarding the multilayer structure, the transitionfrom the previous to next layer (based on properties) was revealed, indicating the influenceof each other. Finally, we calculated the nanomechanical properties of zeolite faujasite,giving relevant data for the response of the material, using a comparison of creep experiments.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2015

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Koumoulos, Elias
  • Κουμούλος, Ηλίας

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/39954

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Koumoulos, Elias; Κουμούλος, Ηλίας. Ανάπτυξη και μελέτη ιδιοτήτων προηγμένων νανοδομών και επικαλύψεων με έμφαση στις νανομηχανικές ιδιότητες. National Technical University of Athens (NTUA), 2015. http://hdl.handle.net/10442/hedi/39954