Back to search

Institutes outside Greece

Σύνθεση και τροποποίηση γραφιτικών νανοδομών και σύνθετων υλικών για παραγωγή προϊόντων με εφαρμογές προηγμένης τεχνολογίας

Abstract

dc:description

The main aim of the present thesis is the synthesis of graphitic nanostructures such as single and multiple walls carbon nanotubes, composite nanostructures in the form of membranes for gas separations and finally graphene.The key objectives of the work were the following:1. Growth of carbon nanotubes with multiple walls (MWCNTs) having the morphology of vertically directed arrays onto inorganic substrates based on SiO2, catalyst ferrocene and carbon sources camphor or xylene in the presence of hydrogen . The method that was used is that of chemical deposition of vapours (CVD). Growth of single wall (SWCNTs) as well as two or three walls carbon nanotubes with metallic or semiconductive properties with the study of two chemical vapour deposition processes; MgO/Fe/Co/Ethanol and MgO/Fe/CH4 at 800 and 850 oC respectively. With these methods SWCNTs with diameters in the range 0.92 - 1.8 nm were produced. 2. Preparation of composite porous ceramic membranes with carbon nanotubes and graphitic nanostructures for gas separations by using chemical vapour deposition in a parallel or vertical (pressure gradient) flow in the pores of ceramic substrate. Two systems were developed, one with Ni catalyst and C2H4 as carbon source and a second with evaporation of xylene/ferrocene solution. For the first system obtained CNTs with diameters around 22nm. For the second system permeance as well as identical selectivities (for CO2, N2, O2, and SF6) were deduced.Simultaneously, composite ceramic membranes with carbon nanotubes were prepared with a simple method after deposition of resins. 3. Preparation of carbon nanotubes with magnetic properties with chemical vapour deposition of C2H4 in the pores of alumina disks that contain magnetite (Fe3O4) as catalyst. A thorough study was carried out on the morphological characteristics (SEM and TEM) of nanotubes with embeded magnetic particles. Moreover, their magnetic properties were investigated with Mössbauer spectroscopy while their sorption capacities were assessed by methylene blue (MB) sorption experiments followed by thermogravimetric analysis (TGA). 4. A series of graphenes were prepared with three different chemical vapour deposition methods. In the first method few layers (two and more) graphenes with magnetic properties were developed by using magnetite catalyst and exposing the substrate to C2H4 as the carbon source in the presence of H2 at 740 oC for different times. In the second method ferrocene was used as catalyst and source of carbon simultaneously and grapheme sheets (two and more layers) were developed by evaporating (warm-up) ferrocene under vacuum followed by deposition of it’s vapours in Si substrates. The effect of temperature in the shaping of layers was studied for the temperature series 650 - 920 oC. The most optimum deposition temperature was found (800 0C, 60 min). Finally, the third method of graphene composition was carried out by chemical vapour deposition of CH4 at 1000 oC in Cu substrates with thickness 0.25-2 μm on SiO2/Si substrate. In this case the effect of H2 presence and Cu thickness of the substrate was studied. It was shown that preparation of few up to single layer graphene is possible.

Degree

thesis:*
Grantor dc:publisher
Institutes outside Greece
Year dc:date
2014

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Pilatos, Georgios
  • Πιλάτος, Γεώργιος

Subjects

dc:subject × 16

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/39964

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Pilatos, Georgios; Πιλάτος, Γεώργιος. Σύνθεση και τροποποίηση γραφιτικών νανοδομών και σύνθετων υλικών για παραγωγή προϊόντων με εφαρμογές προηγμένης τεχνολογίας. Institutes outside Greece, 2014. http://hdl.handle.net/10442/hedi/39964