Technical University of Crete (TUC)
Μοντελοποίηση της σχέσης ενέργειας-διαστασιακών ιδιοτήτων των προϊόντων κατάτμησης σε σφαιρόμυλο
Abstract
dc:descriptionThis thesis aims to model the grinding process in a ball mill and focuses on the dimensional properties of the grinding products and the energy requirements for size reduction of materials. In order to accomplish this, materials with different physico-mechanical properties such as marble, quartz, quartzite and metasandstone, were grounded using different operating conditions.For the determination of particle size distributions of the grinding products, both GGS and RR functions were used. The results showed that these functions were not able to describe the full range of produced particle sizes since the data points deviated from linearity. When the piecewise regression analysis was applied to experimental data, the presence of two distinct size ranges of products was shown. So, the evolution of the two domains of particle sizes in relation with the energy input was examined and improved energy-particle size relationships were proposed.By applying the kinetic model to experimental data, the kinetic parameters that affect the process, namely the feed size, the fraction of space between the balls at rest that is filled with powder and the diameter of the balls were determined. Also, the method of back calculation was used for the better estimation of the kinetic parameters and a new method of calculating the optimal mill operating conditions was proposed, by combining two softwares (Moly-Cop Tools™ and MODSIM™). In addition, the models proposed by both Herbst - Fuerstenau and Stamboliadis to define the size of grinding products were also tested. Then, the simulation of continuous industrial grinding systems was studied. For this purpose, grinding tests in conditions similar to those set by the Bond method were performed. Based on this method, the work indices of the tested materials were calculated and the effect of fines on grinding kinetics was examined.The application of the matrix model to predict the size distribution of the grinding products was also examined. For the application of the model a code in MATLAB was written and the experimental size distributions of grinding products were compared to those predicted by the model. From the determination of particle size distributions, other dimensional properties were also determined, ie. the surface area, the length and the number distributions. From the distribution of dimensional properties it was investigated whether the grinding products are fractal in nature, as suggested by many researchers. The effect of material and milling conditions on the relationship between the dimensional properties and the specific energy input was also examined. For a more in depth investigation of the grinding behavior of the materials, their physico-mechanical properties were determined and correlated with the grinding parameters. From the results obtained it was observed that there is strong correlation between the material properties with some parameters, such as the breakage rate. However, it was revealed that the determination of only one property of the material may not constitute an indication of its behavior during grinding.
Degree
thesis:*- Grantor dc:publisher
- Technical University of Crete (TUC)
- Year dc:date
- 2017
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Petrakis, Evangelos
- Πετράκης, Ευάγγελος
Subjects
dc:subject × 16- Μοντελοποίηση
- Ειδική ενέργεια
- Διαστασιακές ιδιότητες
- ΛΕΙΟΤΡΙΒΗΣΗ
- Σφαιρόμυλος
- Κατανομές μεγέθους τεμαχίων
- Modeling
- Specific energy
- Grinding
- Ball mill
- Dimensional properties
- Particle size distributions
- Επιστήμες Μηχανικού και Τεχνολογία
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Engineering and Technology
- Other Engineering and Technologies
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/40017