Back to search

Aristotle University Of Thessaloniki (AUTH)

Βελτιστοποίηση συνθηκών έδρασης μηχανικών διατάξεων με τη χρήση προηγμένων υλικών

Abstract

dc:description

The precision of mechanical processing depends, among others, on the dynamic behavior of the machine used. The dynamic behavior is dictated, besides the construction characteristics, from the foundation of the machine. The foundation isolates firstly, the dynamic strain induced on the machine from the surrounding and secondly, the vibration that itself generates and spreads on the mechanical structures in its vicinity. Vibration isolation aims towards the protection of an equipment from intensive external shocks and vibrations as well as from occasional disturbances caused by the equipment itself along with the reduction of noise and vibration level in a workshop area. There is a wide set of structural components or assemblies for which vibration is directly related to performance, either by virtue of causing temporary malfunction during excessive motion or by creating disturbance or discomfort, such as stress fatigue failure, premature wear, operator discomfort, unsafe operating condition and high noise levels. For all these potential problems, it is important that the in-service or operation vibration levels that usually encountered in structures have to be predicted and brought under satisfactory control. Thus, it is vital to determine the elastic material properties and the modal parameters, i.e. damped natural frequencies of the structure to avoid resonance, damping factors and mode shapes to reinforce the most flexible points or to determine the exact points so to reduce weight or to increase damping. With respect to these dynamic aspects, nano-reinforced polymeric composites represent an excellent possibility to design components considering the requirements of the dynamic behaviour. Lately much attention has been devoted to the development of polymers in which nanomaterials are embedded in order to improve their mechanical and dynamic properties. However, for the determination of the dynamic properties of high loss factor polymers, it is imperative to apply a mathematical model fitting the experimental data of modal tests. Therefore, the objective of the current thesis is to demonstrate an efficient modal testing method for the investigation of the dynamic mechanical properties of polymeric composite materials. This method utilizes vibration tests in order to measure experimental transfer functions (TFs) as a correlation parameter to analytical-experimental determined TFs. The procedure for the identification of analytical-experimental transfer functions is carried out using a genetic algorithm (GA) by minimizing the difference between the measured data from tests and the calculated response, which is a function of the modal parameters. For the determination of the vibration isolator’s characteristics a Finite Element Model (FEM) was introduced which represents the system machine-isolator-ground. A series of experiments were conducted on a real machine with a proposed optimal set of nanocomposite mounts and the analytical-experimental transfer functions of the system machine-isolator-ground were determined. Finally, this procedure was repeated for different nanofiller concentrations in the polymeric matrix of the nanocomposite mounts, until the optimization of the dynamic characteristics was achieved and the most suitable isolator was proposed as optimal.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Tsongas, Konstantinos
  • Τσογγάς, Κωνσταντίνος

Subjects

dc:subject × 12

Rights

dc:rights
Statement dc:rights
  • BY_NC_SA
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/40035

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Tsongas, Konstantinos; Τσογγάς, Κωνσταντίνος. Βελτιστοποίηση συνθηκών έδρασης μηχανικών διατάξεων με τη χρήση προηγμένων υλικών. Aristotle University Of Thessaloniki (AUTH), 2017. http://hdl.handle.net/10442/hedi/40035