Back to search

National Technical University of Athens (NTUA)

Εφαρμογή καινοτόμων πειραματικών τεχνικών για τη μελέτη της μηχανικής συμπεριφοράς δομικών μελών αρχαίων μνημείων και αριθμητική προσομοίωση

Abstract

dc:description

The structural restoration of stone monuments is a complicated task that demands the co-operation of specialists from various scientific disciplines such as archeologists, architects, structural engineers, chemical engineers and survey engineers. The final decision made is usually a compromise between many and contradictory points of view. The basic problem in case of marble monuments is the restoration of their monolithic character which is sometimes badly damaged. In order for the structural integrity of such monuments to be properly restored, a pioneering technique was developed, some decades ago, by scientists working for the restoration of the Acropolis of Athens. According to this technique the fractured marble elements are connected by inserting titanium bars into pre-drilled holes. The adhesion between marble and bars is achieved by a suitable white cement paste (Korres et al., 1989). Τhe aim of the present work is to quantify the parameters influencing the pull-out phenomenon, i.e. the gradual or abrupt slip of the reinforcing bars, without prior failure of neither the bar nor the marble. More specifically this study is devoted to the investigation of the progressive failure of the interfaces between the constituent elements of the marble-cement paste-titanium complex, by using sensing techniques which permit pumping data from the interior of the specimens. In this direction the Acoustic Emission (AE) and the Pressure Stimulated Currents (PSC) techniques were used. In parallel an attempt is described to check whether the signals recorded using the above two techniques could be considered as proper pre-failure indicators.Due to the fact that the above tests are complex and include three different materials, the characterization of the emitted signals is considered a complicated task. Therefore, it was necessary initially that the non-destructive monitoring techniques were applied on individual materials used in the restoration of monuments in order to extract preliminary useful data.Two classes of Double Edge Notched specimens of Dionysos marble with different lengths of notches were tested on direct tension experiments. The monitoring techniques applied to the tests included a high speed camera detecting the onset and the evolution of the crack in many frames/seconds, the Digital Image Correlation technique (DIC) providing a wider view of the mechanical behavior-deformation of the specimen, the Acoustic Emission technique (AE), monitoring the acoustic activity during the test and the Pressure Stimulated Currents (PSC) technique recording the electrical signals produced by the material’s cracking. The results by the previous innovative techniques were successfully correlated with the traditional mechanical techniques (clip gauges).Also, 3-point bending tests were conducted on specimens of cement paste and mortar similar to those used in the restoration works of the Acropolis monuments of Athens. The applied techniques of the Acoustic Emission and the electrical signals PSC provided interesting results in monitoring the materials behavior and gave signs that the material is near to its fracture. Furthermore, the characterization of the acoustic signals during the experiments identified a significant separation between the signals near and right before the fracture.Another material, Alfas- Rethymnon stone, was tested on uniaxial compression tests and on 3 point bending tests. The Alfas stone is a limestone which was used in many monuments in Crete due to its abundance in the area. Nowadays, Alfas is considered as a potential substitute stone for the restoration of the Epidaurus monuments while in the past it was extensively used for the restoration of several monuments in Crete such as the Monastery of Arkadi, a monument of great historical and cultural significance. After the identification of the acoustic signals and the electrical signals emitted by the individual materials, these techniques were applied to more complex structures, combining different and more than one materials. A multipoint bending experiment were conducted in order to simulate the loading on a restored fractured epistyle with an inclined fault plane. For the monolithic restoration of the two fragments six titanium rods and white cement paste were used, according to the technique followed in the restoration works of the Acropolis monuments.The experimentally applied recording techniques were the Acoustic Emission technique, the electrical signals PSC technique and the Digital Image Correlation (DIC). Their results were successfully combined with those extracted by simple mechanical techniques such as clip gauges and LVDTs (Linear Variable Differential Transformer).The “pull out” test and the multipoint bending test of the restored epistyle are simulated numerically using the Finite Element program ABAQUS. The main goal is to have a reliable numerical model that will be able to describe the behavior of the interface between the titanium bars - marble and the overall mechanical behavior of the above complex structures. Finally, through a numerical parametric analysis, the influence of different fault’s angles on the restored epistyle’s mechanical behavior will be examined.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Dakanali, Ioanna
  • Δακανάλη, Ιωάννα

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/40070

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Dakanali, Ioanna; Δακανάλη, Ιωάννα. Εφαρμογή καινοτόμων πειραματικών τεχνικών για τη μελέτη της μηχανικής συμπεριφοράς δομικών μελών αρχαίων μνημείων και αριθμητική προσομοίωση. National Technical University of Athens (NTUA), 2017. http://hdl.handle.net/10442/hedi/40070