Aristotle University Of Thessaloniki (AUTH)
Ηλεκτροχημικές αντιδράσεις βιομηχανικού ενδιαφέροντος σε μεταλλικά ηλεκτρόδια που επικαλύπτονται από αυτοοργανούμενες μονοστοιβάδες οργανικών ενώσεων
Abstract
dc:descriptionMethanol is the product of choice in the electrochemical reduction of carbon dioxide both from the thermodynamic point of view and the technological one. The direct conversion of CO2 to CH3OH is kinetically difficult since the effective current density achieved so far is in the order of few μA cm-2. Formic acid can be produced from the electrochemical reduction of CO2¬ by both high rate and high %CE (%Current Efficiency), which exceeds 90% on metals such as Sn, Pb and In. This work aims to the electrochemical conversion of formic acid to CH3OH by a two step process including the conversion of CO2 to formic acid:CO2 +2H+ +2e-→ HCOOH (1) and the reduction of formic acid to CH3OH in the second step:HCOOH + 4H+ +4e-→ CH3OH + H2O (2)The electrochemical reduction of formic acid in acidic solution (2 M HCl) on a Cu(88)Sn(6)Pb(6) cathode showed that the main products were CH3OH and CH3CH2OH having %CEs of 30.3 and 37.6% respectively at -0.8 V vs. Ag/AgCl. The rate of the reduction was increased exponentially with the negative potential in the range of -0.65 to -1.00 V. In pure HCOOH as electrolyte (23.6 M) a noticeable amount of CH3CHO (17.1%) was detected. The reduction on other metallic cathodes such as Ni, Fe, Mo and Cr in acidic solution showed that only Cr had an ability to reduce HCOOH.The reduction on chromium cathode in 1:1 v/v mixture of H3PO4 (85%) and HCOOH (98%) at 80 0C showed that the main products were methanol, methyl formate and methane. The total %CE in all experiments exceeded 100% and this was attributed to the cathodic dissolution of chromium which provided an additional reduction capacity. The rate of the reduction increased significantly by increasing both the negative potential and the concentration of HCOOH in the solution. The rate of reduction increased exponentially with temperature and the appeared activation energy was calculated to be 85.7 kJ/mol. A reduction scheme was proposed in which the formyl cation CHO+ was the key intermediate. Chromium is by far the most efficient electrode for the reduction of ΗCΟΟH since the selectivity to CH3OH and HCOOCH3 was between 89 and 98% at a current density of 13 mA cm-2. The separation of the main products (CH3OH and HCOOCH3) from the reaction mixture was easy due to their volatility.The second part of this thesis aimed to the conversion of the dinitrogen gas to ammonia. At 150 oC and 10 atm on Fe nanoparticles (<10 nm) and cubic Ru nanoparticles (<5 nm) the %CE of ammonia formation was 2.16 and 2.24% respectively. On hexagonal Ru dispersed on carbon, the reaction rate displayed a maximum vs. potential in all pH values studied. The maximum was shifted at more negative potentials by about 0.06 V as the pH of the solution increased by one unit. The rate of the reduction decreased as the pH of the solution increased.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2017
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kotoulas, Ioannis
- Κωτούλας, Ιωάννης
Subjects
dc:subject × 12Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/40111