Back to search

University of Patras

Ανάπτυξη και μελέτη φωτοκαταλυτικών υλικών με υψηλή απόκριση στην ηλιακή ακτινοβολία για την παραγωγή υδρογόνου και την καταστροφή ρύπων στην υγρή φάση

Abstract

dc:description

The first part of this study focuses on the synthesis, characterization and investigation of the photocatalytic activity of catalysts for environmental applications, such as photocatalytic degradation of emerging micro-pollutants. After literature review, bismuth vanadate (BiVO4) and silver orthophosphate (Ag3PO4) were selected, as they have been found to exhibit high photocatalytic activity. Preparation methods of these catalysts, as well as their combinations with suitable promoters, such CuOx/BiVO4, CoOx/BiVO4, Ag3PO4/TiO2 and Ag3PO4/WO3, and important information on the structure and morphology, arising from characterization techniques, are discussed in detail. The photocatalytic activity of the Cu/BiVO4 photocatalysts was evaluated for the degradation of bisphenol-A (BPA), a representative endocrine disrupting compound, under artificial visible - and solar - light irradiation. Pure BiVO4 was found to be active for the title reaction and its photocatalytic performance was substantially improved following addition of copper. Optimal results were obtained for the catalyst containing 0.75 wt.% Cu. Results are explained considering the efficient separation of photogenerated electron-hole pairs at the p-n heterojunction developed between the n-type BiVO4 and the p-type CuO (or Cu2O) semiconductors. Interestingly, results showed that the rate of BPA degradation increases dramatically (by a factor of 15) in the presence of bicarbonate (HCO3-), compared to ultrapure water. The role of HCO3- was investigated with electron paramagnetic resonance (EPR) and it was concluded that the high photodegradation rate in the presence of HCO3- can be attributed to the formation of large amounts of •OH radicals.Cobalt oxides such as CoO and Co3O4, are p-type semiconductors with unique electronic configuration. However, there are only few reports in the literature that examine their photocatalytic activity, in comparison with other metal oxides such as copper oxides. In the present study the photocatalytic activity of CoOx/BιVO4 catalysts was evaluated by photocatalytic degradation of propyl-paraben (EP), another endocrine disrupting compound. BιVO4 containing 0.5 %wt. CoO exhibited the greatest photocatalytic activity. It should be noted that, in that case there was no beneficial effect in the presence of HCO3-. The photocatalytic activity of silver orthophosphate (Ag3PO4) and its composites with P25 TiO2, (Ag3PO4/TiO2(x:y)), was investigated for the photocatalytic degradation of bisphenol-A (BPA). Optimal photocatalytic performance for the title reaction was observed for the Ag3PO4/TiO2 photocatalyst with a molar ratio 75:25. This is explained considering the favourable relative positions of the valence band and conduction band edges of the two semiconductors, which facilitate interfacial charge transfer and, concomitantly, suppression of the electron-hole recombination rate. However, the catalysts partially lost their activity upon repeated use for 5 consecutive runs, due to irreversible reduction of silver orthophosphate by photogenerated electrons. The photocatalytic activity of Ag3PO4/WO3(x:y) photocatalysts was tested for the degradation of an antibiotic, sulfamethoxazole (SMX). Optimal results were obtained for the Ag3PO4/WO3(75:25) photocatalyst. It was assumed that due to the relative positions of redox potentials (CB and VB) of WO3 and Ag3PO4, the photogenerated electrons could move from the CB of Ag3PO4 to that of WO3 limiting the formation of metallic Ag on the surface of Ag3PO4 and thus increasing the stability of Ag3PO4. However the amount of photocorrosion was significant in the present reaction conditions. The second part of this study, deals with the synthesis of photocatalysts suitable for photocatalytic hydrogen evolution reaction. The semiconductor photocatalysts investigated for this purpose were cadmium sulphide-based materials, mainly due to their relatively high response to visible light. Specifically, photocatalytic production of hydrogen has been investigated over aqueous dispersions of CdS-ZnS (25 wt.% CdS) and Ni/(CdS-ZnS) powders, in the presence of sulphide/sulfite ions as sacrificial electron donors. CdS-ZnS composites were prepared by a co-precipitation method followed by calcination in air at temperatures in the range of 300 to 600 oC. Results show that heat treatment at around 500 oC results in materials with increased activity for H2 evolution, attributed to the formation of (Zn0.78Cd0.22)S (named as CZS(500)) phase. Photocatalytic performance is further improved upon doping the optimized photocatalyst with small amounts of Ni (~0.05 wt%), in which case the rate of H2 evolution is two times higher compared to that obtained over the benchmark 0.5%Pt/TiO2 photocatalyst. Additional tests were obtained in the presence of glycerol, a biomass derived compound, in solution (CC3H8O3=1.367 M) and in the presence of wastewater from photographic film printing process. The Ni/CZS(500) promoted photocatalysts showed photocatalytic activity only in the case of real wastewater.Moreover, a series of nickel phosphide (Ni2P) promoted CZS(500) photocatalysts with variable loading (x = 0.12, 0.26 or 2.0 wt.%) were synthesized and their photocatalytic activity for hydrogen production was investigated. Ni2P belongs to the group of transition metal phosphides, which nowadays are studied as noble-metal-free co-catalysts in photocatalytic hydrogen evolution reactions. Results of photocatalytic performance tests obtained over the xNi2P/CZS(500) catalysts in the presence of sulfide/sulfite ions revealed that the addition of small amounts of Ni2P results in a significant increase of the rate of H2 evolution, which goes through a maximum for the sample containing 0.25 wt.% Ni2P. Further increase of Ni2P loading leads in gradually lower hydrogen production rates. Interestingly, the Ni2P-promoted CZS catalysts showed photocatalytic activity even in the absence of sulfide/sulfite ions, when only glycerol was adopted as sacrificial agent. This finding indicates the improved stability of the metal phosphide-promoted catalysts and increases their practical value, as glycerol is a low (or negative) cost by-product of biodiesel manufacturing and therefore is of special interest as feedstock for hydrogen production.In the third part of this study, the production of hydrogen by photo-induced reforming of glycerol has been investigated with the use of commercial catalysts TiO2(Degussa P25) promoted with noble metals (Me: Pt, Rh, Pd, Ru). Optimal results obtained for the 0.5%Pt/TiO2 sample. Moreover, the photo-induced production of H2 and CO2 from aqueous solutions of formic acid (FA) has been investigated over Pt/TiO2 photocatalyst suspensions irradiated with simulated solar light. Experiments were performed with the use of three different concentrations of formic acid in solution (CFA= 11, 100 or 1000 mM) in the presence of flowing Ar containing variable concentrations of oxygen (x%O2/Ar; x= 0, 2, 3, 5). Results clearly show that the presence of small amounts of O2 has a beneficial effect on the rate of photocatalytic decomposition of formic acid over Pt/TiO2. Both the rates and the total amounts of H2 and CO2 produced are maximized in the presence of 3%O2 flowing through the reactor. Oxygen is usually considered an electron scavenger, and as such its competition with hydrogen reduction suggests that its presence would reduce H2 production. The observed trends can be justified considering that TiO2 surface sites can effectively trap photoelectrons and act as recombination sites. At low O2 concentration the scavenging of the electrons trapped on TiO2 surface prevails over the competition for photoelectrons at Pt islands, significantly reducing trapped electron-hole recombination and increasing the overall efficiency.Finally, a series of catalysts belonging to a broader group of metal oxynitrides, were synthesized and characterized with the use of several techniques. Specifically, TaON(T) and GaN:ZnO(T) were obtained through “solid state reaction” at T≥ 800 oC. The oxynitrides unlike the initial oxides showed strong absorption throughout the visible region and the near infrared. However the photocatalytic activity of these materials tested in various photocatalytic reactions was disappointing. The main reason seems to be their low inherent ability to produce photogenerated species.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Petala, Athanasia
  • Πεταλά, Αθανασία

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/40140

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Petala, Athanasia; Πεταλά, Αθανασία. Ανάπτυξη και μελέτη φωτοκαταλυτικών υλικών με υψηλή απόκριση στην ηλιακή ακτινοβολία για την παραγωγή υδρογόνου και την καταστροφή ρύπων στην υγρή φάση. University of Patras, 2017. http://hdl.handle.net/10442/hedi/40140