University of Patras
Μελέτη ηλεκτρικών και οπτικών ιδιοτήτων τροποποιημένων φωτοαγώγιμων υλικών του συστήματος TiO2-ZnO
Abstract
dc:descriptionThis dissertation attempts synthesis of new photoconductive materials TiO2 and TiO2-ZnO system in order to improve them in relation to commercial titania P25. The samples are made using the one-step hydrothermal or solvothermal method in different media (acidic, basic, or alcohol). The media influence, as well as Zn-doping on their electrical and photoconductive properties is studied. Usually, the TiO2-ZnO preparation follows two steps, since the one step synthesis is a difficult process. The first one includes the TiO2 preparation or the use of a commercial P25. In the second one Zn is added. When Zn is added in small amounts, Zn-doped TiO2 samples are obtained, while larger Zn amounts create nanocomposite material TiO2-ZnO. In other cases, the presence of Zn can cause the formation of Ti3+ ions coming from the reduction of Ti4+, creating Ti3+ self‐doped TiO2. Three main kinds of samples are prepared. In the first case, the solvent is water and hydrogen peroxide, while carbonates ions ((CH3) CHO-) act as modifiers creating an alkaline medium. In the second case, an acidic medium is achieved using water as a solvent, with sulfuric acid and Zinc salt acting as modifiers. Two different reaction times (10 and 24 h) are used for the above preparation. In the third case, the solvent is the isopropyl alcohol, the modifier is the Diethylenetriamine (DETA) and by adding Zinc salt, Zn-doped TiO2 or nanocomposite material TiO2-ZnO are obtained.The morphological structure of the crystals is examined using XRD, SEM, TEM, BET N2 adsorption/desorption and UV-vis characterization techniques. The dark conductivity as well as the transient photoconductivity is studied in all kinds of samples, in vacuum and in air, since TiO2 and TiO2-ZnO system is affected by molecular Ο2 and humidity. In the first case, from the XRD patterns the three phase of TiO2 (anatase, routile and brookite) are found. SEM shows that there are some differences in the the particles size and UV-vis measurements show changes in energy gap (Eg), which is attributed to the three TiO2 phases. From BET measurements small differences in specific surface areas are presented and the samples are mesopore materials. The temperature dependence of their electrical conductivity is investigated. The conductivity data were fitted using thermal activation process, grain boundary model (GB), small polaron hopping (SPH) model and Mott’s variable range hopping model in the different temperature regimes. Measurements in air reveal the competition between the oxygen molecules adsorbed on TiO2 surface that act as electron scavengers causing the conductivity decrease and OH- of humitidy which give electrons, increasing the conductivity of the samples. The presence of the three titania phases affects the transient photoconductivity values. The presence of rutile phase enhaces the recombination in recombination centers, while that of anatase in traps.In the second case, only the anatase phase appears in the XRD patterns. It seems that sulfuric acid acts as the anatase phase inducer. The reaction time and the presence of Zinc change the crystallinite size. A similar behavior for the particles size is observed by SEM. Moreover, BET measurements show that the samples are mesopore materials. From UV-vis measurements, the samples absorb in the 3.2 eV region, like anatase. Electrical conductivity and the conduction mechanisms were also studied in these samples. Transient photoconductivity measurements are influenced by the reaction time and the addition of Zinc. In this case, the Zinc acts as a reducing agent that creates self-doping Ti3+ or oxygen vacancies, suppressing the electron-hole recombination.In the third case, from the XRD patterns, only the anatase phase is presented. The presence of either Zn or ZnO phases in the crystal is not observed at XRD spectra when small Zn amount is added, which implies that an effective substitution of Zn+ into the anatase TiO2 nanocrystals has occurred. Such a process seems valid as the (101) and (004) peak position shifts to the right of the pure anatase TiO2 peak. Peaks of TiO2 and ZnO are observed for larger Zn amounts. SEM images show differences in the particles size and TEM confirms the presence of TiO2 and ZnO. From BET measurements, the specific surface area of samples in this case presents changes and some samples are mesopore, but other samples macropore. Moreover, the conduction mechanisms are found in different temperature regions. The transient photoconductivity behavior is influenced by Zn-doping and the optimum doping amount of 8% is found. Finally, some samples are used in applications such as their photocatalytic activity in air pollutants NO and their DSSC efficiency. Their results are related to the transient photoconductivity behavior.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2017
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Georgakopoulos, Tilemachos
- Γεωργακόπουλος, Τηλέμαχος
Subjects
dc:subject × 6Rights
dc:rights- Statement dc:rights
-
- BY_NC_SA
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/40221