Back to search

University of Patras

Αντισεισμικός σχεδιασμός επίπεδων κατασκευών οπλισμένου σκυροδέματος με ιδιομορφικούς συντελεστές συμπεριφοράς και διάφορες στάθμες επιτελεστικότητας

Abstract

dc:description

In this Ph.D Thesis a performance-based seismic design method, for plane reinforced concrete (R/C) moment-resisting frames (MRF), MRF with Infills and dual system with rectangular Walls, is proposed. The method is a force-based seismic design one utilizing not a single strength reduction factor as all modern codes do, but different such factors for each of the first significant modes of the frame. These modal strength reduction factors incorporate dynamic characteristics of the structure, different performance targets and different soil types. Thus, the proposed method can automatically satisfy deformation demands at all performance levels without requiring deformation checks at the end of the design process, as it is the case with code-based design methods.Empirical expressions for those modal strength reduction factors as functions of period, deformation/damage and soil types, which can be used directly in conjunction with the conventional elastic pseudo-acceleration design spectra with 5\% damping for seismic design of R/C MRFs, are provided. These expressions have been obtained through extensive parametric studies involving nonlinear dynamic analyses of 76 frames under 100 seismic motions. The method is illustrated by numerical examples (at the end of this abstract and at the Chapter 9 which demonstrate its advantages over code-based seismic design methods.Modern seismic codes like Eurocode 8 employ linear elastic response spectrum analysis in conjunction with the strength reduction (R) or behaviour factor (q), which takes into account in a very approximate manner (just constant values depending on structural type) the inelastic behaviour of the structure. Checking of the deformation is done at the end of the design process and usually leads to heavier sections for the structure than those originally selected for satisfaction of strength requirements. This approach of seismic design is known as force-based design (FBD) because seismic forces are the main parameters.Damage and deformation of a structure are closely linked. Thus, by controlling deformation during the design process, one controls damage. This is the main idea of the displacement-based design (DBD), which employs displacements as the main parameters and thus controls deformation and hence damage directly.During the last 15 years or so, a new seismic design philosophy emerged, the performance-based design (PBD) one, which considers three or four design levels, each one corresponding to a specific seismic intensity and specific performance requirements in terms of deformation and/or damage.Part 3 of EC8 adopts a fully performance-based approach for existing buildings by defining three performance levels in terms of chord rotation values of the members. Thus, this approach could be used for performance-based design of R/C structures.Two main weaknesses are found in the behavior factor value provided in all modern codes: The first is that it is not linked to the dynamic characteristics of the structure. The second one is that it cannot control deformation as required in performance based design.In this Ph.D Thesis, a performance-based seismic method for reinforced concrete (R/C) plane structures including moment resisting frames, frames with infills and dual-system with Walls, working in the framework of the familiar FBD method is proposed. The main idea is to construct modal strength reduction factors for the first few modes and four to six performance levels, which depend on the dynamic characteristics of the structure, the deformation and the damage. The concept of these modal strength reduction factors was first presented by Papagiannopoulos and Beskos in connection with the seismic design of plane steel moment resisting frames. This concept is extended here to the case of the seismic design of plane R/C structures in a much more improved and utilitarian way. Such an extension is by no means trivial as it requires detailed and advanced modeling of R/C material behaviour, which is usually more complex than that of steel. In addition, many more frames and seismic motions are considered here than in Papagiannopoulos and Beskos where only 36 near-field motions had been considered. Here 76 frames under 100 far-field motions (motions considered in EC8 recorded at four types of soil are utilized. Finally, while in Papagiannopoulos and Beskos modal strength reduction factors can only be used in conjuction with absolute-acceleration design spectra (which have to be constructed by the designer), in this thesis these factors can be used in conjuction with the conventional pseudo-acceleration design spectra, which are familiar to engineers.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • muho, edmond
  • Μούχο, Έντμοντ

Subjects

dc:subject × 33

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/40278

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

muho, edmond; Μούχο, Έντμοντ. Αντισεισμικός σχεδιασμός επίπεδων κατασκευών οπλισμένου σκυροδέματος με ιδιομορφικούς συντελεστές συμπεριφοράς και διάφορες στάθμες επιτελεστικότητας. University of Patras, 2017. http://hdl.handle.net/10442/hedi/40278