National Technical University of Athens (NTUA)
Αξιοποίηση ανανεώσιμων πηγών ενέργειας για την κάλυψη υδατικών και ενεργειακών αναγκών
Abstract
dc:descriptionThe subject of this PhD thesis is the design of autonomous, hybrid systems that produce power for the simultaneous cover of electrical energy and water with the use of Renewable Energy Sources (RES) and desalination with Reverse Osmosis (RO). More specific, the renewable technologies of photovoltaics and wind turbines are used, with battery array as an energy storage and with conventional diesel genset as a backup/auxiliary system. The design of a system that combines two different RES technologies with storage and simultaneous cover two different needs, is a technical challenge in which, within this thesis, is overcome by the use of design rules and energy dispatch priorities.Objective of this PhD thesis is the development of the appropriate methodology that will specify the basic design parameters of the various subsystems and it allow their evaluation.The methodology is applied with the use of a custom decision support software developed for the purposes of this thesis, in order to be easy to use and to export results with minimum effort and in short time.The methodology for the selection of the appropriate system is composed by 7 steps:•In the first step the calculation of the basic parameters for the energy subsystem takes place with the use of mean monthly values for meteorological data and steady demand for water and energy loads.•In the second step an preliminary viability analysis is calculated for alternative systems from the first step. The basic energy figures are estimated such as the energy delivered to the load from RES, the energy production from the auxiliary unit etc.•In the third step the systems are evaluate with the use of hourly simulation but taking into account different energy management rules.• In the fourth step sensitivity analysis is carried out for the cases/systems created in the first and third step. By changing the values of the RES potential, the installed power, the fuel cost and the battery array size.• In the fifth step risk analysis is applied to the proposed cases. The risk analysis is carried out with the Monte Carlo method, with uncertainty parameters the fuel price, the mean solar radiation, mean annual wind speed, water demand and energy demand. •In the sixth step the identification of dominant solutions within the proposed cases is held.•In the seventh step the final case selection is made with the help of Multi-Criteria Analysis (MCA) as to the 14 evaluation indicators.The methodology was applied in the design of a system with water and energy needs for a small and isolate community of 60 inhabitants in Tunis.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2017
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kartalidis, Avraam
- Καρταλίδης, Αβραάμ
Subjects
dc:subject × 16- Αφαλάτωση
- ΑΠΕ
- Υβριδικά Συστήματα Ενέργειας
- Σύστημα υποστήριξης αποφάσεων
- Αντίστροφη ώσμωση
- Ανανεώσιμες πηγές ενέργειας
- Desalination
- RES
- Hybrid Energy Systems
- Decision support systems
- Reverse osmosis
- Renewable energy systems
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
dc:rights- Statement dc:rights
-
- BY_NC_ND
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/40332