Aristotle University Of Thessaloniki (AUTH)
Αναλυτική και Πειραματική διερεύνηση της συμπεριφοράς νέας διάταξης απορρόφησης σεισμικής ενέργειας για την προστασία των κατασκευών
Abstract
dc:descriptionPassive seismic energy dissipation systems, such as friction dampers, metallic –yielding- dampers, viscous dampers etc. have been proposed to reduce the dynamic response of structures under seismic excitations. Numerous such devices have been used for the strengthening of existing or new structures in USA, Canada, Japan and elsewhere. The efficacy of such devices towards the anti-earthquake design of structures seeks to minimize the extent of damages upon them, by means of absorbing a considerable amount of the seismic energy input due to the hysteretic behaviour of them. The swift development in structural engineering leads to the continuous devising of more and more seismic energy dissipation devices.The central axis of this Ph.D. Thesis consists of an integrated and in-depth study of a new seismic energy absorbing device, under the codename CAR1 and lies into the division of passive energy dissipation systems, since it does not require external power to generate system control forces. It can be used as a means of strengthening new or existing RC or steel structures, by embodying it into single diagonal or cross-shaped steel strengthening braces. Depending on the particular demands of each structure, the appropriate number of devices and locations to be installed are chosen. Moreover, the distinctive features of this device can be modified and adapted to the respective needs of any structure. The investigation of these features (geometry, material and boundary conditions) was one of the targets of this Ph.D Thesis. This new device possesses a triple function as: (i) controlling the axial forces developed in the diagonal braces by imposing an upper limit (Control), (ii) absorbing seismic energy through material yielding and simultaneous friction between the interfaces (Absorbed), and (iii) restraining the displacements of itself and, by extension, the overall structure, to a desired level (Restrain). Therefore, the advantages of this novel anti-seismic steel device CAR1 are not restricted only to the dissipation of seismic energy but also extend to the protection of the diagonal steel braces against an early failure. Furthermore, the device is designed in such a way that it is possible to secure its inelastic displacements, hence limiting, alongside, the displacements of the structure to a desired level upon the needs of each different case. To this end, the device improves the seismic response of the structure by absorbing most of the seismic energy, thereby protecting the bearing structure against contingent failure.Experimental and numerical studies have been conducted. The main consideration was given to the development of numerical simulations, through 3D Finite Elements, in order to acquire an accurate and detailed prediction of the behaviour of the CAR1 device. The finite element method (FEM) has become the most popular method in the fields of research and industrial numerical simulation, as it takes into account the laws of the material, conditions of contact between interfaces and a number of other parameters, which lead to an accurate response of the investigated device. The experimental investigation was carried out at the Experimental Laboratory of Strength of Materials and Structures, department of Civil Engineering at the Aristotle University of Thessaloniki. The results of the initial pilot experiments worked as the basis for the establishment of the 3D finite elements micro-model,capable of exhibiting accurately the behavior of the device CAR1. The results of the other experiments were the key to promote the credibility of the 3D finite element model. A Crucial stage during the assessment of the numerical models was, not only the contrast of the hysteretic loops but also the contrast of the deformation of the experimental tests with the numerical results. Therefore, a reliable numerical tool for the prediction of the response of this novel CAR1 device was created.From the rigorous parametric study conducted, the main parameters that influence the behavior of the CAR1 device were emerged. The variety of choices (in terms of its individual features), depending on the required needs of each structure, was also confirmed. The results obtained were described in P-u diagrams, upon which the structural engineer can select the features of this seismic energy absorbing CAR1device for variable antiseismic performance targets (based on target reaction force or target displacement). Finally, this Ph.D Thesis ends with the selection of the individual features of the CAR1 devices to strengthen a three-storey frame bearing structure.Based on the results of the analyses conducted for this study, the following conclusions can be drawn: (i) the device is in line with the international seismic design requirements, as it improves the seismic response of the structure, absorbs a great deal of the seismic energy input, protecting thereby the bearing structure and enables the structural engineer and/or manufacturer to have a more reliable prediction of the contingent failure, (ii) a reliable tool has been created, capable of producing accurately enough reasonably: a) the stiffness of the experimental test, b) the experimental load- displacement curve (P-u), c) the deformed state of the overlapping blade coupons at any time increment, and d) the failure mode in the final loading stage of the experimental set up and, (iii) the Load-Displacement diagrams make it easier for the structural engineer to choose the individual features of the CAR1 device for the seismic strengthening of the structures (modified per each floor of a multi-storey structure).
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Titirla, Magdalini
- Τιτίρλα, Μαγδαληνή
Subjects
dc:subject × 6Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/40340