Back to search

Aristotle University Of Thessaloniki (AUTH)

Σχεδιασμός και βελτιστοποίηση οδοστρωμάτων από σκυρόδεμα σε δασικές και ορεινές περιοχές

Abstract

dc:description

The scope of this thesis is to investigate the design and properties of rigid concrete pavements for forest and mountainous areas of Greece. Rigid pavements at forest roads must provide adequate bearing capacity, long service life and good traffic conditions, with the minimum construction and maintenance cost.The area of research is Epirus, at Northwestern Greece, which is characterized as a steep, mountainous landscape, covered by forests to a great extent. Forest roads without pavement at the mountainous areas of Epirus must be maintained yearly in order to be usable. On the other hand, forest roads with rigid pavement have no need for maintenance and even at the end of the pavements life cycle remain useable. Rigid pavements have been established as a good technical solution for the Forest Service, which constructs them at forest roads with repeated surface wear.So far rigid pavements at forest roads in the mountains of Epirus have been constructed on an empirical basis. Basic parameters of road pavements design have been ignored. Furthermore, the energy footprint of the constructed forest rigid pavements is high and no industrial byproducts or recycled materials have been used in order to reduce life cycle cost.Forest and mountainous roads are low volume roads; trucks carry heavy loads of wood only during the harvest period. In mountain and forest areas, like the mountains in the area of Epirus, it is inefficient to record traffic volumes due to the extensive forest road network and bad weather conditions during the winter. For this reason, traffic load is estimated using forest wood production, farming intensity and the amount of industries located at forest and mountainous areas (quarries, wind farms, etc.). Using this information it is possible to calculate traffic load for any forest and mountainous area.In order to make a complete registry of the problems and failures of concrete pavements constructed in forest roads of the Region of Epirus, it was decided to record the existing concrete pavements by visiting and surveying most of the forest road network of Epirus. A large area of the Region of Epirus was covered including parts with high tree density.A database was created containing problems in the observed road network, in order to identify and present the most common causes of failure in the forest concrete pavements. An identification and categorization of the concrete pavement properties was carried out and core specimens were drilled from concrete, while soil specimens were also taken from the ground where the concrete layer was based on. The traffic load for the service life of the pavements was then estimated and, based on the results, the required concrete layer thickness was calculated. The results of this research show that the existing forest concrete pavements of Epirus were constructed with less than the minimum required designed thickness, a practice that could account for some of their durability issues.Rigid pavement thickness design for new forest pavements has been made using empirical, analytical, and mechanistic-empirical methods. The calculations made using the 1993 AASHTO Empirical Equation for Rigid Pavements; SteetPave12; LTPP Rigid Pavement Online; and MnDOT M-E Design for Rigid Pavements, show that a C20/25 concrete layer with 15 cm thickness is adequate for the most forest roads in Epirus. Rigid pavements at forest roads are mainly constructed with concrete. Research previously carried out by the AUTH Laboratory of Building Materials regarding the use of industrial by-products, such as steel slag and fly ash, in the concrete mix was also adopted in order to focus on the design and construction of rigid forest pavements in Greece.The maintenance and rehabilitation cost of forest roads without pavement was contrasted to the cost of rigid pavements at forest roads and the savings that can be achieved by using high volume fly ash concrete were estimated.The key points concerning the design and construction of forest rigid pavements are: •Proper preparation and soil formation must be carried out before the construction of the rigid pavement •Wherever the soil is vulnerable to erosion, the ditch of the forest road alongside the rigid pavement must be constructed with concrete or stones•The use of high volume fly ash concrete results in major cost savings in forest rigid pavements construction•RCC pavements are very effective for use in forest roadsThe entire research leads to a Forest Rigid Pavement Management System – FRPMS. In Greece, forest mountainous roads are mainly being designed by forest engineers under the supervision and approval of the local forest service. For the design and construction of rigid pavements at forest roads there are currently no specifications available and are being constructed empirically. Rigid pavement design for the average forest road in Epirus has been determined in this research, although by following the FRPMS it is possible to design optimal rigid concrete pavements for any forest and mountainous areas of Greece.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Anastasiou, Georgios
  • Αναστασίου, Γεώργιος

Subjects

dc:subject × 10

Rights

dc:rights
Statement dc:rights
  • BY
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/40342

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Anastasiou, Georgios; Αναστασίου, Γεώργιος. Σχεδιασμός και βελτιστοποίηση οδοστρωμάτων από σκυρόδεμα σε δασικές και ορεινές περιοχές. Aristotle University Of Thessaloniki (AUTH), 2016. http://hdl.handle.net/10442/hedi/40342