National Technical University of Athens (NTUA)
Calculation of the hydrodynamic resistance of appendages on conventional vessels
Abstract
dc:descriptionThe present thesis deals with the numerical formulation, programming and validation of a method for solving the viscous flow problem around the appendages on conventional vessels. The proposed method is follows the overlapping blocks approach, part of the Finite Volume family of methods.The proposed method is based upon and expands the LSMH method for solving the resistance and propulsion “bare” hull problem. The LSMH method solves the Reynold’s Averaged Navier-Stokes (RANS) in conjunction with the two equations k-ε or k-ω-SST turbulence models. Introduced in this thesis is the use of Total Variation Diminishing differencing scheme with Minmod limiter function. The use of this higher-order scheme aims at increasing the accuracy of the method. The propeller action is modeled via the classical actuator disk method.The flow around the hull is modeled using structured body fitted grids, comprising orthogonal curvilinear 2-D O-type grids, generated by means of the conformal mapping technique. The method is expanded so that up to three grid blocks may be employed, aiming at increasing the accuracy of the predictions for ships with “full” lines near the bow and also to predict the effect of a “wetted” transom stern.A novel hybrid method is proposed in this thesis where the free surface id calculated by means of a potential solver and then it is corrected via a surface tracking RANS method. The correction is applied only at the aft half and the wake of the ship while boundary conditions on the free surface are specially treated, in order to avoid convergence problems. The proposed method is validated by comparing the calculated free surface for two ship designs with experimental data.A new Overlapping Grid Block method is then proposed for solving the flow problem around the appendages. The flow around each component of the ship appendages is solved using a separate grid block. The blocks overlap and information is passed-on from one block to the other through the boundary conditions of the later. A method for the parametric representation of ship appendages is presented in this thesis.The LSMH RANS solver is modified to handle the new blocks and the exchange of flow variables according to the overlapping block approach.The new software is used to solve the resistance and propulsion problem of the “Dyne” tanker, at both model and full scale and for both the “bare” hull and the case of the ship with the rudder. The rudder is modeled using a separate grid block. A grid independence test is performed, in order to determine the required grid size for the rudder block. Also a series of tests is presented, to evaluate the effectiveness of the overlapping block setup. All numerical results are compared with the available experimental data.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2017
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Polyzos, Stylianos
- Πολύζος, Στυλιανός
Subjects
dc:subject × 20- Υπολογιστική υδροδυναμική
- Υδροδυναμική πλοίου
- Αντίσταση πλοίου
- Πρόωση πλοίου
- Παρελκόμενα πλοίου
- Επικαλυπτόμενα πλέγματα
- Μέθοδος όγκων ελέγχου
- Πηδάλιο πλοίου
- Computational fluid dynamics
- Marine hydrodynamics
- Numerical towing tank
- Ship propulsion
- Ship appendages
- Total variation diminishing
- Surface tracking
- Overlapping blocks
- Επιστήμες Μηχανικού και Τεχνολογία
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Engineering and Technology
- Other Engineering and Technologies
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/40485