Democritus University of Thrace (DUTH)
Ανάπτυξη ψηφιακών ηλεκτρονικών χαμηλής ισχύος, σε ολοκληρωμένα κυκλώματα μικτού σήματος για διαστημικές εφαρμογές
Abstract
dc:descriptionThe basic target of the present dissertation is the development and validation of design methodology for space applications’ digital circuits. The research followed three interrelated directions: (a) designing with emphasis on low power consumption, (b) designing for radiation hardening against total ionizing dose (TID) and single event (SEE) effects, and generally space environment effects on integrated circuits, and finally (c) developing for integrating digital and analogue circuits into mixed signal designs. The presented solutions include full custom design, in combination with the usage of automated tools in certain design steps to reduce development time.As case study, a digital communication protocol for space applications has been selected. The reason for this selection is its widespread usage. All systems need a communication interface with other systems, the central satellite CPU, or the down link to earth stations, in order to transfer telemetry and control data. The CAN protocol has been selected, as a complex protocol, which is nonetheless widely used in space missions, and which due to its complexity can patently demonstrate the usefulness of our approach. The implementation of CAN was integrated in a telemetry mixed signal IC.This dissertation presents initially the problems that constituted the field of research. Then it presents the methodology and its application to the case study. In parallel, simulation results and test results from chip measurements are given, to validate the suitability and correctness of our approach. The CAN protocol was developed and integrated in the ETM ASIC, a chip that retrieves essential telemetry data, fabricated at a 250 nm CMOS process, as part of an ESA European research project. We also developed test boards and software tools to facilitate the design, simulation and validation of the circuits.Through our research, we claim and prove that a combination of full-custom design and automated design tools can be fruitful, by targeting each of the two design approaches to the appropriate sub-systems, based on analysis of the specifications, the functionality and the possible benefits. The main criteria used to assess the methodology are low power consumption and radiation hardening. In parallel, we demonstrate the importance of further research on the development of tools that will accelerate the design procedure and reduce the amount of manual tasks, without deteriorating the performance of the result.
Degree
thesis:*- Grantor dc:publisher
- Democritus University of Thrace (DUTH)
- Year dc:date
- 2016
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Pouiklis, Georgios
- Πουϊκλής, Γεώργιος
Subjects
dc:subject × 12- Χαμηλή κατανάλωση ισχύος
- Ολοκληρωμένα κυκλώματα
- Διαστημική
- Low power circuits
- Low power consumption
- Application specific integrated circuits (ASICS)
- Design of integrated circuits
- Aerospace industry
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
dc:rights- Statement dc:rights
-
- BY
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/40523