Back to search

University of Patras

Μελέτη εκτατικών ροών υμένων νευτωνικών και μικροδομημένων ρευστών που εμπεριέχουν φυσαλίδες

Abstract

dc:description

Motivated by the probe experiment for characterizing the adhesion strength of polymeric materials, we studied the axisymmetric extensional flow of a viscoelastic liquid filament that contains one or three initially spherical bubbles along its axis of symmetry. The filament is confined between two parallel and coaxial disks of the same radius and its initially cylindrical outer surface is surrounded by air. The flow is induced by the axial extension of the upper disk under constant velocity, while the lower disk remains stationary. The rheology of the liquid is described by the exponential Phan-Thien & Tanner viscoelastic model. A quasi-elliptic transformation combined with domain decomposition and local mesh refinement is employed to discretize the domain. The mixed finite element Galerkin method for the mass and momentum balances combined with the EVSS-G method and SUPG weighting for the constitutive equation are used to obtain their weak forms. All these are necessary for the successful simulation of much larger filament extensions and of liquids with higher elasticity than those reported earlier. The evolution of the filament and the bubble(s) free surfaces depends on the interplay of the viscous, elastic and capillary forces. It was found that, when the ratio of the elastic and the capillary forces is small compared to the viscous forces, the bubble attains very large deformations. The onset of cusps was observed at the bubble poles for intermediate values of capillarity and elasticity. The force varies with the filament extension (or time) in a way reported in experiments measuring the strength of adhesive materials: Its initial increase up to a maximum is followed by a plateau and finally it drops to zero when the adhesive tends to fail. Increasing the filament elasticity delays the development of stresses (and the applied force). The effects of the wettabity, the flow parameters and the surface tension on the transient extensional flow of a liquid bridge with gas inclusions between two plates are studied with the use of FEM simulations. The results show that the wettabity plays an important role on the amount of liquid that is finally attached to each plate. More precisely the major part of the liquid is attached to the plate with the higher wettability, after the breaking of the bridge. The slip coefficient affects the shape of the final gas bubbles but not the amount of liquid attached to each plate. When the two plates are of the same material the amounts of liquid and gas attached to each plate are equal. The elongation of the liquid bridge is found to be inversely proportional to the surface tension while the point where the liquid bridge breaks depends on the Reynolds number. These results are found to be in good agreement with experimental results [36]. The pinching occurring during the formation and the break-up of the liquid bridge are also studied. The results obtained for the pinching are also in agreement with literature [55, 58]. Because of the three dimensional nature of many physical problems encountered in industrial processes and applications, we developed a novel 3D elliptic grid generator for the construction and the deformation of structured grids. The specific application we consider is related to the large deformations of an air/liquid interface of a liquid that lies between two parallel plates. The new technique is based on the Laplace equations of the inverse mapping along with internal constraints, which are considered essential in order to adjust grid spacing. This set of equations is accompanied with appropriate set of boundary conditions that is the simultaneous solution of the Laplace prοblem for the 2D flat boundaries and the 3D air/liquid hyper-surface. The imposition of the 1D differential arc-length at each of the edge boundaries in the computational domain is the adjusting condition for optimal distribution along the moving contact lines. The new 3D grid generator provides the smoothness of the coordinate lines not only in the bulk, but also on the boundary surfaces. The kinematic condition is invoked for the motion of the 3D surface of the bubble and we also consider the free motion of the 2D contact line (points where the air in the bubble and the surrounding liquid meet the solid boundary). In order to resolve better the flow field and the shape of the bubble free surface we have also developed a local mesh refinement technique. In this way the demand for computational memory is reduced. The algorithm was partially parallelized so a very convenient speed up of the solution was achieved. Our method in 3D grid generation follows the Arbitrary Lagrangian Eulerian (A.L.E.) formulation, which when combined with the finite element/Galerkin method provides a flexible and robust tool for simulating free surface flows in three dimensions. From the physical point of view, an initially perturbed bubble lies on the lower substrate-in the middle of a symmetrically confined cell. At the lateral boundaries symmetry conditions are imposed so that similar cells are supposed to lie adjacent to the initial one. Due to the extensional nature of the flow the bubble inflates mostly radially than axially. The wetting/dewetting driven flow depends on the dynamic angle at the circumference of the bubble and on its difference from the receding or advancing limit. The Navier slip law is applied between the solid substrate and the liquid adhesive. When the slip becomes quite small the slow dynamics of the contact line-brings about the formation of fingers that grow from the intial perturbation shape.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2015

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Papaioannou, Ioannis
  • Παπαϊωάννου, Ιωάννης

Subjects

dc:subject × 24

Rights

dc:rights
Statement dc:rights
  • BY_NC_ND
Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/40776

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Papaioannou, Ioannis; Παπαϊωάννου, Ιωάννης. Μελέτη εκτατικών ροών υμένων νευτωνικών και μικροδομημένων ρευστών που εμπεριέχουν φυσαλίδες. University of Patras, 2015. http://hdl.handle.net/10442/hedi/40776