Back to search

National Technical University of Athens (NTUA)

Μεταλλοκεραμικές επικαλύψεις θερμικού ψεκασμού πλάσματος σε ανοξείδωτο χάλυβα

Abstract

dc:description

The research that has been done during the elaboration of this thesis had to do with the study of cermet coatings WC-12%Co and WC-17%Co plasma thermal spraying.The coatings had been created by techniques of atmospheric plasma spraying and of vacuum plasma spraying and had been placed on a stainless steel. Moreover their microstructure, their frictional behaviour during sliding friction and abrasion wear as well as their surface treatment with laser were studied.The first stage had to do with the choice of elements which were tungsten carbides WC in a metallic cobalt matrix, in two different percentages of Co 12% and Co 17%. These elements were chosen because the two phases they are composed of combine the hardness and the abrasion resistance of the ceramic phase with the high ductility and the thermal conductance of the metallic phase. WC-12% which has the biggest percentage of carbides, has more hardness that is why it is used in applications where we find sliding wear. On the other hand WC-17%, having a higher percentage of metallic matrix, is much more ductile and that is why it is used in components which go through impacts and increased ductility is needed in order not to create cracks which are failures. These coatings are widely used in industrial applications which demand resistance to various kinds of abrasion wear and mechanical abrasion.The atmospheric plasma spraying technique is used for coatings of cermets because the high plasma temperature leads to equable powder melting and to their placement on the substrate with low porous percentages. A main feature of this technique is the production of oxides on coatings due to the presence of oxygen during the spraying. By the vacuum plasma spraying technique there are less oxides and less porous on the coatings.The spraying conditions for both elements through both techniques have gone through an improvement process by combining the methods of one factor at a time and the method of Taguchi experiment designing. The coatings produced were studied as far as the absence of minor cracks, minor porous, and the good particles melting of the sprayed powder, factors which determine the microstructure quality of a surface. These features have been observed by scanning electron microscopy through an X-ray microanalysis system on metallographic sections of coated samples. Moreover the microhardness and thickness of the coatings as well as the X-ray diffraction and the roughness were measured. The coatings produced with the most improved features mentioned above were studied as far as their friction behaviour by tribometer ball-on-disk so as to study the wear mechanism by sliding friction and by scratch test so as to study the wear mechanism through a third body. Various elements for example Al2O3 , Si3N4 and WC were used as an counter body of the coatings to study the coatings in sliding friction conditions. Moreover mechanic erosion tests were made on the WC-12%Co coatings produced by atmospheric plasma spraying and by using abrasion tests on the WC-17%Co coatings by atmospheric plasma spraying.Finally, coatings have gone through a laser surface treatment. In the beginning the laser effect on a motionless target was studied in order to define the radiation parameters which lead to the reduction of the porous surface and to the surface smoothing. Next the surface was scanned by laser and the mechanical behaviour was studied in conditions of friction sliding.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2016

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Palli, Ioanna
  • Πάλλη, Ιωάννα

Subjects

dc:subject × 25

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/40807

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Palli, Ioanna; Πάλλη, Ιωάννα. Μεταλλοκεραμικές επικαλύψεις θερμικού ψεκασμού πλάσματος σε ανοξείδωτο χάλυβα. National Technical University of Athens (NTUA), 2016. http://hdl.handle.net/10442/hedi/40807